Search results for: 'safe'

AEMC PowerPad III power quality analyzer supports single- and three-phase diagnostics with voltage/current inputs, trend recording, alarms, and USB data transfer.

Fluke 1587 FC Multimeter: Wireless insulation testing with live circuit detection, data logging, and app-based remote monitoring.

Fluke I30 current clamp adaptor enables precise AC/DC current measurement with Hall Effect technology for non-intrusive testing.

CAT III 1000V Safety rating No contact AC voltage detection from 12 to 1000 VAC No metallic contact Compact size with pocket clip Red LED Voltage level indication Audible alarm if voltage is present Built-in white LED light

AEMC HX0030C PROBIX PRHX1 1/10 Probe: High-frequency 250MHz voltage probe rated 600V CAT III, designed exclusively for OX Series oscilloscopes.

AEMC 5000.50 Probe 10:1 BNC Male for OX5022 & OX5042 kits. Durable 600V input for precise test measurements. Compact, reliable, and easy to connect.

Fluke SMFT-1000 PRO delivers complete PV safety and performance testing with I-V curve tracing, irradiance measurement, and IEC 62446-1 compliance.

Fluke FLK-A3000FC KIT Wireless Current Clamp Kit measures up to 400A AC with logging, inrush capture, and Fluke Connect wireless monitoring.

Fluke 1748/15/EUS captures waveform and RMS profiles with Class A accuracy, 1500A iFlex probes, and multi-session logging for advanced power quality analysis.

Amprobe 30XR-A Multimeter: Accurate voltage, current, and resistance testing with VolTect non-contact detection, data hold, and manual ranging.

Fluke oscilloscope delivers portable, high-performance waveform analysis with isolated inputs, TrendPlot, ScopeRecord, and FFT analysis.

AEMC AmpFlex 196A-24-BK waterproof IP67 sensor measures up to 10,000AAC. Compatible with Models 8435, 8436, PEL 105 & 115.

Fluke 279FC I/B Thermal Multimeter combines True-RMS measurements with built-in thermal imaging and wireless Fluke Connect for safer troubleshooting.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

Fluke 3000 FC delivers wireless multimeter testing with remote monitoring, logging, and mobile connectivity for safer, faster electrical diagnostics.

Fluke 902 FC Clamp Meter: Wireless HVAC tool with flame rod µA measurement, 60kΩ resistance range, and Fluke Connect® for safer, remote diagnostics.

AEMC 6503 Hand-Cranked Megohmmeter: Reliable insulation resistance testing with 250V, 500V, 1000V test voltages and AC measurement up to 600V.

The Fluke 1587/I400 FC pairs a full-featured 2-in-1 insulation tester and True-RMS digital multimeter with a 400 A AC current clamp. Designed for maintenance, motor-drive, and electrical system diagnostics, it offers insulation resistance testing, voltage/current measurements, and clamp-based AC current readings in a single kit

AEMC OX 9104IV Handheld Oscilloscope: Rugged 4-channel 100MHz scope with a 7" touchscreen, FFT, multimeter, Wi-Fi, and isolated inputs for lab or field use.

Built-in white LED illumination light Detect AC voltage 90~1000 VAC with no metal contact Compact size with clip fits into pockets or tool pouches Red LED and audible alarm if voltage is present Non-conductive outer surface to avoid high voltage shock Powered by two 1.5V AAA batteries (not included) CAT IV 1000V Safety rating

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)