Search results for: 'stock'

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

AEMC AmpFlex 196A-24-BK waterproof IP67 sensor measures up to 10,000AAC. Compatible with Models 8435, 8436, PEL 105 & 115.

AEMC AmpFlex 193-24-BK sensor measures current safely up to 12,000AAC with a flexible design that's compatible with Models 3945, 8220, 8230, and PEL Series products.

AEMC MN94 AC Current Probe: Compact 200A sensor with 4-pin lead, 0.2 class accuracy—ideal for PowerPad 8345 & PEL52, meter checks, and power analysis.

Schneider Electric TRV00911 USB Maintenance Interface: Reliable, high-performance tool for ComPacT NSX & NSXm. Optimize maintenance with ease!

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

INNO SPAW7000 Power Analysis Wavecorder with up to 7 power channels and 2 motor channels, supporting DC–5 MHz bandwidth, harmonic analysis to the 500th order, and high-accuracy power measurement.

The Eagle Eye GFL-1000 Portable DC Ground Fault Locator identifies current leakage faults in DC systems up to 1000 V. It measures grounding resistance and distributed capacitance to locate faults while systems remain online.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke 1738/B Advanced 3-Phase Energy Logger captures voltage, current, power, and harmonics with Fluke Connect support for in-depth energy analysis.

Fluke 279FC I/B Thermal Multimeter combines True-RMS measurements with built-in thermal imaging and wireless Fluke Connect for safer troubleshooting.

Fluke 1550C Insulation Resistance Tester delivers digital insulation testing up to 5 kV with DAR/PI calculations, long battery life, and Fluke Connect support.

Fluke 376FC True-RMS Clamp Meter delivers wireless AC/DC current and voltage measurements up to 1000A with iFlex probe and Fluke Connect support.

Fluke BK120-T5-600 kit combines a smart circuit breaker finder with a T5-600 tester for fast breaker identification and safe voltage, current, and continuity checks.

Fluke 190-204-III CAL ScopeMeter offers 200 MHz bandwidth, four isolated channels, deep memory, and traceable calibration for advanced industrial troubleshooting.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.