Search results for: '1000v 50'

AEMC 5050 Digital/Analog Megohmmeter with 5000V insulation testing, auto DAR, PI, DD, backlight, alarm, timer, rechargeable battery, and AC power.

AEMC PowerPad IV 8345 Analyzer: Class A three-phase power quality analyzer with touch LCD, transient capture, energy valuation, and remote control.

AEMC PEL 112 power and energy logger supports electrical monitoring, energy audits, diagnostics, and load studies across multiple power systems.

INNO Instrument SPA6000 is a modular power analyzer with a 12.1-inch touchscreen, support for up to four input modules, 512GB internal storage, and AC/DC power measurement bandwidth from DC to 5MHz.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, measures AC current up to 1000A with 1mV/A output—ideal for tight, irregular spaces.

AEMC Power & Energy Logger supports energy audits, power monitoring, load studies, alarms, reports, and multi-phase electrical system analysis.

AEMC AmpFlex Rogowski coil current sensor with a 36" flexible loop. Measures 100A and 1000A AC with dual 10mV/A and 1mV/A output. Ideal for tight, irregular spaces and large bus bars.

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

AEMC AmpFlex® Rogowski coil sensor, 36" flexible design for tight spots. Measures up to 3000A AC with 1mV/A output—ideal for irregular conductor shapes.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, handles up to 3000A AC with 1mV/A output—perfect for tight and irregular conductor spaces.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC PowerPad Model 8436 Power Quality Analyzer supports power quality diagnostics, trend recording, alarms, transients, and electrical network analysis.

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

AEMC PowerPad III power quality analyzer supports single- and three-phase diagnostics with voltage/current inputs, trend recording, alarms, and USB data transfer.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

3-1/2 digits 1999 counts 0.8% best accuracy Portable one-hand operation Data hold, low battery indication Max. jaw opening: 2 in.

The Fluke 1587/I400 FC pairs a full-featured 2-in-1 insulation tester and True-RMS digital multimeter with a 400 A AC current clamp. Designed for maintenance, motor-drive, and electrical system diagnostics, it offers insulation resistance testing, voltage/current measurements, and clamp-based AC current readings in a single kit

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.

Fluke 1550C KIT Insulation Resistance Tester delivers up to 5 kV testing with adjustable test voltages: 50 V increments up to 1000 V and 100 V steps for test voltages over 1,000. Includes DAR results, rugged IP67 case, and long battery life for field use.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

Fluke 1550C Insulation Resistance Tester delivers digital insulation testing up to 5 kV with DAR/PI calculations, long battery life, and Fluke Connect support.

The Fluke IB875K kit pairs the rugged 87V True-RMS multimeter with insulated hand tools for safe, accurate industrial troubleshooting. It handles complex signals, VFD applications, and demanding environments while the included tools support high-voltage maintenance tasks.

Fluke 177 multimeter delivers True-RMS accuracy, backlit display, and CAT IV safety for fast, reliable electrical troubleshooting in any environment.