Search results for: '1000v 6'

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

AEMC AmpFlex® Rogowski coil sensor, 36" flexible design for tight spots. Measures up to 3000A AC with 1mV/A output—ideal for irregular conductor shapes.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, handles up to 3000A AC with 1mV/A output—perfect for tight and irregular conductor spaces.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC PowerPad Model 8436 Power Quality Analyzer supports power quality diagnostics, trend recording, alarms, transients, and electrical network analysis.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

AEMC PowerPad III power quality analyzer supports single- and three-phase diagnostics with voltage/current inputs, trend recording, alarms, and USB data transfer.

3-1/2 digits 1999 counts 0.8% best accuracy Portable one-hand operation Data hold, low battery indication Max. jaw opening: 2 in.

The Fluke 1587/I400 FC pairs a full-featured 2-in-1 insulation tester and True-RMS digital multimeter with a 400 A AC current clamp. Designed for maintenance, motor-drive, and electrical system diagnostics, it offers insulation resistance testing, voltage/current measurements, and clamp-based AC current readings in a single kit

Fluke FLUKE-355 Clamp Meter: High-current True-RMS AC/DC measurements up to 2000A with wide jaw capacity, surge capture, and CAT IV safety for demanding electrical work.

The Fluke 374 FC delivers advanced troubleshooting with wireless connectivity, True-RMS measurements, AC/DC current to 600 A (expandable to 2500 A w/ optional iFlex probe) and 1000 V voltage capability — built for industrial professionals.

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.

Fluke 27 II delivers rugged industrial multimeter performance with IP67 protection, 3 m drop resistance, and accurate voltage, current, and capacitance testing.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Fluke FLK-V3000FC KIT enables wireless voltage and current monitoring with the 3000 FC multimeter and V3000 module, ideal for remote logging and safe diagnostics.

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Fluke I2500-18 flexible AC current probe enables accurate 2500A measurements with thin Rogowski coil design for tight spaces and hard-to-reach conductors.

AEMC MiniFlex® MA194-24-BK — Flexible Waterproof Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series. Replaces Cat #2140.78.

The Fluke 1663 is a complete electrical installation tester designed for professional contractors and maintenance teams. It performs insulation, continuity, loop impedance, RCD, and earth resistance tests, with onboard memory and software integration for streamlined reporting.

Fluke 3000 FC delivers wireless multimeter testing with remote monitoring, logging, and mobile connectivity for safer, faster electrical diagnostics.

Amprobe ACDC-54NAV Clamp Meter: Measures AC/DC up to 1000 A/V, temperature, and power diagnostics with TRMS accuracy and wide industrial jaws.

Fluke T+PRO-1AC combines a full-featured electrical tester with a non-contact AC voltage detector for safe AC/DC testing, continuity checks, GFCI testing, and fast live circuit detection.