Search results for: '2.0 2 20 8'

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

AEMC MN94 AC Current Probe: Compact 200A sensor with 4-pin lead, 0.2 class accuracy—ideal for PowerPad 8345 & PEL52, meter checks, and power analysis.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

AEMC MN375 AC Current Probe: Compact 10A range with hooked jaw, 100mV/A output, banana plug lead, UL approved for precise power and low-level current use.

Compact AEMC MN134 AC current probe with 10A range, 100mV/A output, reinforced lead, CE certified. Ideal for precise industrial and electrical measurements.

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

Fluke 190-504-III ScopeMeter: Rugged 500MHz, 4-channel portable oscilloscope with deep memory, USB/Wi-Fi, and CAT IV 600V safety rating.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

AEMC MN353 AC Current Probe: 150A range with 10mV/A voltage output. 5 ft lead with banana plugs. High accuracy, low phase shift. Replaces Model MN251.

AEMC MN291 AC Current Probe: 200A range, 100mVDC/A output for DMMs or loggers, compact design with banana plug lead, ideal for DC voltage input instruments.

Fluke 190-062-III-S ScopeMeter: Rugged 60 MHz 2-channel oscilloscope with intelligent triggering, FFT analysis, and built-in multimeter.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

Boost energy efficiency with the Fluke 1735 Power Logger! Perfect for three-phase load studies & electrical troubleshooting. Learn more and optimize your systems today! 

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Compact AEMC MN379T AC Current Probe with True RMS, 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft BNC lead, 40 Hz–10 kHz frequency response.

AEMC 400D-24 Digital FlexProbe®: True RMS AC current tester with 24ft flexible sensor, 400A range, ideal for tight spaces and CAT IV 600V safety rating.

Megger MOM3 handheld micro-ohmmeter rated up to 300 A for low-resistance measurement. Auto range covers 0.1 µΩ to 3000 mΩ with selectable 5–300 A test current. Battery-operated IP54 instrument with USB-C PC communication and pass/fail threshold setting.

The Eagle Eye GFL-1000 Portable DC Ground Fault Locator identifies current leakage faults in DC systems up to 1000 V. It measures grounding resistance and distributed capacitance to locate faults while systems remain online.

AEMC MD305 AC current probe: 600A range with 1mA/A output, rugged clamp design, banana plugs, ideal for meters with ≤5Ω input.

Amprobe CT235A AC/DC clamp transforms high current up to 1000A into safe millivolt signals for precise measurements with meters and data loggers.

3-1/2 digits 1999 counts 0.8% best accuracy Portable one-hand operation Data hold, low battery indication Max. jaw opening: 2 in.

Introducing the OWON SDS1022 Super Economical Type Digital Oscilloscope – Your Precision Tool for Unmatched Performance.