Search results for: 'leading 1'

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

AEMC MD301 AC Current Probe: 500A range with 1mVDC output, ideal for loggers and recorders. Rugged clamp with banana plugs and 5ft lead.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

AEMC SR704 AC current probe with 1mA/A output, 1000A range, 52mm jaw, and 5 ft lead. Designed for DMMs, loggers, and harmonic meters with low phase shift.

Compact AEMC MN379T AC Current Probe with True RMS, 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft BNC lead, 40 Hz–10 kHz frequency response.

AEMC MH60 AC DC Current Probe: Portable 100A current probe with BNC output, 1MHz bandwidth, rechargeable battery, perfect for any oscilloscope.

Delivers fast point-to-point continuity testing for grounded pathways and long-distance connections with polarity reversal, lead compensation, programmable thresholds, and 300 V CAT IV safety.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Compact AEMC MN134 AC current probe with 10A range, 100mV/A output, reinforced lead, CE certified. Ideal for precise industrial and electrical measurements.

High-accuracy AEMC SR604 AC current probe with 1000A range, low phase shift, 1mA/A output, 5 ft lead, ideal for DMMs, loggers, oscilloscopes, and power measurements.

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

AEMC MR193-BK AC/DC Current Probe: 1–1300A, 10ft CA lead, Ideal for PowerPad & PEL series items — accurate, high-capacity power and energy monitoring.

AEMC MiniFlex® MA193-14-BK — Flexible Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series, Includes a 2.75” clamp

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.

Fluke VPS410-II-V 10:1 Voltage Probe Set: 500MHz high-precision testing, reliable performance, and essential accessories for accurate measurements!

AEMC JM830A AC Current Probe — 3000A range, 0.333mA/A output, low phase shift, banana plug lead — Ideal for DMMs, power, and harmonic meters.

The Fluke FLK-393FC-PVLEAD Clamp Meter Bundle includes the 393 FC CAT III 1500 V True-RMS clamp meter with iFlex probe and Pomona PVLEAD1 and PVLEAD3 solar PV test lead sets. It measures up to 1500 V DC, 1000 V AC, and 999.9 A AC/DC, with up to 2500 A using the iFlex probe.

Fluke SMFT-1000 PRO delivers complete PV safety and performance testing with I-V curve tracing, irradiance measurement, and IEC 62446-1 compliance.

Fluke T+PRO-1AC combines a full-featured electrical tester with a non-contact AC voltage detector for safe AC/DC testing, continuity checks, GFCI testing, and fast live circuit detection.

AEMC 6424 Digital Ground Resistance Tester Kit 300ft: Accurate 3-point ground testing with auto-ranging, backlit LCD, and easy hookup for reliable earth resistance.

Megger MOM3 handheld micro-ohmmeter rated up to 300 A for low-resistance measurement. Auto range covers 0.1 µΩ to 3000 mΩ with selectable 5–300 A test current. Battery-operated IP54 instrument with USB-C PC communication and pass/fail threshold setting.

AEMC MN193-BK AC Current Probe: Dual range 5A/100A, measures from 5mA to 120A, 10ft lead—designed for PowerPad, PEL Series, L104 & L56 applications.

AEMC MN09 AC current probe with 150A range, 100mV DC/A output, ideal for low-power industrial measurements. Includes 5 ft lead and banana plug.