Search results for: 'nota de 1$'

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Built-in white LED illumination light Detect AC voltage 90~1000 VAC with no metal contact Compact size with clip fits into pockets or tool pouches Red LED and audible alarm if voltage is present Non-conductive outer surface to avoid high voltage shock Powered by two 1.5V AAA batteries (not included) CAT IV 1000V Safety rating

CAT III 1000V Safety rating No contact AC voltage detection from 12 to 1000 VAC No metallic contact Compact size with pocket clip Red LED Voltage level indication Audible alarm if voltage is present Built-in white LED light

Fluke FLK-FEV150/TY1 PRO EV Charging Station Analyzer delivers safe AC EVSE testing with Type 1 plug, guided workflows, and advanced TruTest reporting.

Introducing the OWON TAO3102A 2-Channel 14-bit 100MHz Tablet Oscilloscope

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

Fluke NORMA 6004 portable power analyzer delivers precise four-channel power measurements with 0.1% accuracy and wide 500kHz bandwidth for field and lab use.

Fluke 1577 combines insulation testing and true-RMS multimeter features for motors, generators, cables, and switchgear troubleshooting.

Compact AEMC MN02 AC current probe with 100A range, 1mA/A output, 1% accuracy and a 5 ft lead — Ideal for low-power and industrial current measurements.

AEMC 6417 Clamp-On Ground Resistance Tester: Includes Bluetooth, alarms, memory, and DataView software for easy, accurate ground resistance testing.

Introducing the OWON HDS2062M-N Handheld Digital Oscilloscope – Your Precision Toolkit on the Go.

Introducing the OWON SDS1102 Super Economical Type Digital Oscilloscope – Precision Engineering at Its Best.

Introducing the OWON VDS3104L PC Oscilloscope – Precision, Power, and Connectivity Redefined for Unparalleled Measurements.

Introducing the OWON TAO3122A 2-Channel 14-bit 120MHz Tablet Oscilloscope

AEMC 6424 Ground Resistance Tester Kit: 3-point testing with 150ft leads, auto-ranging, and large LCD—perfect for fast, accurate ground resistance measurement.

Introducing the OWON TAO3102 2-Channel 8-bit 100MHz Tablet Oscilloscope

Introducing the OWON HDS3102M-N Handheld Digital Oscilloscope – Precision Meets Portability, Designed Just for You.

Amprobe CT235A AC/DC clamp transforms high current up to 1000A into safe millivolt signals for precise measurements with meters and data loggers.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

AEMC OX 5042B Handscope: Portable 3-in-1 oscilloscope, multimeter, and harmonic analyzer with 2 channels, 40MHz bandwidth, and advanced current probes.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

Introducing the OWON VDS2064L PC Oscilloscope – Precision, Versatility, and Connectivity for Unmatched Measurements.

AEMC 514 Clamp-On Meter delivers AC/DC current, TRMS, voltage, frequency, ohms, and continuity with a large, 4000-count display and 1-year warranty.

Amprobe ACD-10 PLUS clamp meter measures AC/DC voltage to 600V, AC current to 600A, with thin jaws for tight spaces and auto-ranging convenience.