Search results for: 'tea,s'

LEM USA HAL 200-S Current Transducer: Precision 200A Hall Effect sensing for industrial power systems. Compact, efficient, and high immunity to interference!

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

Fluke 125B/NA/S Industrial ScopeMeter combines a 40 MHz oscilloscope, dual multimeters, and bus health testing for fast industrial troubleshooting.

Fluke I5S-PR: Compact 5A AC current clamp delivers accurate, non-intrusive measurements for Fluke 1750 Power Recorder and ScopeMeter tools.

Fluke i3000s Flex Clamp: Measure up to 3 kA AC in tight spaces with flexible probe and versatile 30/300/3000 A ranges.

Fluke I40S-EL AC clamp-on current transformer for low current measurement up to 40 A. Designed for accurate readings on 1 A and 5 A secondary current transformers with a compact clamp profile.

Fluke i3000s Flex-36 AC Current Clamp measures up to 3 kA with flexible probe for tight spaces, ideal for oscilloscopes, recorders, and data loggers.

Repl Shaft & Bearing, Small

The Pro’sKit 3 5/6-digit (5999 count) True-RMS flexible clamp meter delivers accurate AC current, resistance, and frequency measurements. Its flexible coil allows easy access around large conductors, while smart auto-ranging ensures precise, reliable readings in the field.

Fluke I30S current clamp enables accurate AC/DC current measurement using Hall Effect technology for safe, non-intrusive testing with scopes and meters.

Fluke 190-062-III-S ScopeMeter: Rugged 60 MHz 2-channel oscilloscope with intelligent triggering, FFT analysis, and built-in multimeter.

Fluke ScopeMeter: Rugged oscilloscope for industrial waveform analysis with LCD, USB, Wi-Fi, and rechargeable Li-Ion battery for field use.

Fluke 190-502-III ScopeMeter delivers 500 MHz bandwidth, 5 GS/s sampling, CAT IV safety, and portable oscilloscope performance for industrial troubleshooting.

Fluke I3000S FLEX-24 AC iFlex current probe measures up to 3000 A using flexible Rogowski technology for hard-to-reach conductors.

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

The Pro’sKit 3 3/4-digit (3999 count) AC/DC clamp multimeter provides precise voltage, current, resistance, frequency, and capacitance measurements. Designed for technicians, it combines clamp convenience with multimeter versatility for accurate electrical diagnostics.

350 pcs of 22 AWG solid wires Pre-cut, Pre-stripped and Pre-formed on each end. Variety of colors Completely Reusable 14 lengths x 25pcs each (2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125mm)

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

Diagnose with precision! The Fluke 124B Industrial ScopeMeter is a powerful 40 MHz handheld oscilloscope designed for efficient troubleshooting in industrial settings. Learn more and upgrade your toolkit today!

Introducing the OWON AS201 1-Channel Oscilloscope: Analog Simplicity Meets Digital Precision

INNO Instrument SPA2000 digital power meter with 1 power channel, up to 1000 V and 50 A measurement, DC to 100 kHz bandwidth, 4-display LED readout, harmonic analysis to the 100th order, and USB, Ethernet, RS-232/GPIB, and D/A interfaces.

Fluke 123B/NA/S ScopeMeter: Rugged handheld oscilloscope with multimeter and recorder, dual-input testing, TFT display, USB, Wi-Fi, and rechargeable battery.