Search results for: 'key goods'

Fluke 772 Clamp Meter: Effortless 4-20 mA signal measurement & sourcing without breaking the loop. Compact, precise, and built for reliable control testing!

AEMC PowerPad III power quality analyzer supports single- and three-phase diagnostics with voltage/current inputs, trend recording, alarms, and USB data transfer.

The Megger MJÖLNER 200 is a portable micro-ohmmeter high current system integrated into a rugged hard case with on-board display and controls. The front panel provides DC+ and COM terminals, dedicated sense inputs, shunt output, current clamp input, and labeled interface ports for field testing configurations.

Megger MIT1025 Insulation Tester: Measure insulation resistance up to 10kV with advanced diagnostics. Fast, reliable, and built for high-performance testing.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3‑Wire, 120Volt AC.

Megger PAT420 Electrical Tester: Reliable, high-performance testing for earth bond, insulation, and more. Perfect for safety with easy-to-read LCD display. Made for professionals.

Introducing the OWON AS201 1-Channel Oscilloscope: Analog Simplicity Meets Digital Precision

Discover the OWON AS101 1-Channel Oscilloscope: Your Digital Upgrade to Analog Precision

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Certified pre-owned Megger MIT1025: 10 kV insulation resistance tester designed for high-voltage equipment diagnostics. It delivers fast, stable readings up to 20 TΩ, supports PI/DAR testing, and includes advanced filtering for noisy environments—ideal for substations, motors, cables, and transformers.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

Introducing the OWON TAO3104A 4-Channel 14-bit 100MHz Tablet Oscilloscope

Introducing the OWON TAO3074 4-Channel 8-bit 70MHz Tablet Oscilloscope

Introducing the OWON TAO3072A 2-Channel 14-bit 70MHz Tablet Oscilloscope

Introducing the OWON TAO3072 2-Channel 8-bit 70MHz Tablet Oscilloscope