Search results for: 'cat tests'

The AEMC 6471 Ground Resistance Tester Kit 500ft comes with a rechargeable battery, DataView software, and versatile 2- to 4-point earth resistance measurement.

Fluke FLUKE-323 CAL Clamp Meter: Rugged True RMS tool for electricians, measuring AC/DC voltage, AC current up to 400 A, resistance, and continuity.

This solar ground fault locator pinpoints active PV faults up to 1500V using non-contact signal tracing and includes 1 year of Premium Care.

The Fluke 378 FC is a premium wireless clamp meter featuring FieldSense non-contact voltage/current measurement, True-RMS AC/DC current to 1000 A (expandable to 2500 A with included iFlex probe), built-in power quality indicator and wireless data capabilities — optimized for advanced industrial power diagnostics.

Amprobe PRM-6 tester verifies phase sequence and motor rotation with wireless non-contact detection and CAT IV 600 V safety.

Fluke 117/323 combo kit: Versatile multimeter and clamp meter with test leads, magnetic hanger, and carrying case for residential or commercial use.

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

Fluke 114 digital multimeter with backlight offers True RMS accuracy, AutoVolt detection, and LoZ mode for reliable go/no-go troubleshooting.

AEMC 6527 Digital Megohmmeter: Multi-range insulation and continuity tester with voltmeter, audible alerts, and lockable test button for field use.

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.

AEMC 6522 Digital Megohmmeter: Insulation, continuity, and voltage testing with a backlit dual display, test lock, and a timed measurement mode.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke 325 Clamp Meter: Accurate 400A AC/DC True-RMS measurements with temperature, frequency, and resistance—ideal for electricians.

Fluke 323 clamp meter for accurate AC/DC voltage and current testing up to 600V/400A with True RMS, slim design, and data hold for easy diagnostics.

AEMC NC-1 Non-Contact AC Voltage Detector: Indoor use, detects 120-240VAC within 5mm, 600V CAT III safety rated with battery-powered operation.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

AEMC 2135.56 Model 6422 delivers digital ground resistance testing with direct-reading 2P and 3P measurement modes, auto-ranging operation, and a backlit LCD for fast field checks.

The AEMC 6471 Ground Resistance Tester Kit with a 300ft cable is portable with a rechargeable battery, USB communication, auto-ranging, and accurate earth resistance measurement.

Model No. MT-1210 Digits 3-1/2 digits 1999 counts Accuracy 1.0% best accuracy DCV 200mV/2V/20V/200V ±(1.0%+2d)500V ±(1.2%+5d) ACV 200/500V ±(2.5%+10d) DCA 200μ/2mA/20mA/200mA ±(2.0%+5d) 10A ±(3.0%+5d) Resistance 200Ω/2K/20K/200KΩ ±(1.0%+5d) 2MΩ ±(1.5%+5d) Extra function

AEMC High-frequency flexible AC current probe with a 10" sensor, measuring 0.5A to 300A with 1% accuracy. Offers excellent frequency response up to 1MHz, low phase shift, and overload protection. Ideal for oscilloscopes with BNC input, power measurements, and confined spaces.

Fluke 190-502-III ScopeMeter delivers 500 MHz bandwidth, 5 GS/s sampling, CAT IV safety, and portable oscilloscope performance for industrial troubleshooting.

100MHz, 2-channel portable oscilloscope performance with CAT IV safety, deep memory, and Connect-and-View triggering.

Fluke BK120-T5-600 kit combines a smart circuit breaker finder with a T5-600 tester for fast breaker identification and safe voltage, current, and continuity checks.