Search results for: 'direct'

The AEMC SR601 AC Current Probe delivers 1000 A AC current measurement with a 1000:1 ratio, 1 mA/A output, and 4 mm banana jack connection for DMMs, loggers, and compatible instruments.

AEMC High-frequency flexible AC current probe with a 10" sensor, measuring 0.5A to 300A with 1% accuracy. Offers excellent frequency response up to 1MHz, low phase shift, and overload protection. Ideal for oscilloscopes with BNC input, power measurements, and confined spaces.

AEMC AmpFlex® Rogowski coil sensor, 36" flexible design for tight spots. Measures up to 3000A AC with 1mV/A output—ideal for irregular conductor shapes.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, handles up to 3000A AC with 1mV/A output—perfect for tight and irregular conductor spaces.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

High-performance AEMC JM861 AC current probe with 3 ranges (30A, 300A, 3000A), low phase shift, BNC output, ideal for oscilloscopes & power quality analysis.

Reliable AEMC 5233 Digital Multimeter: Measure AC/DC currents, temperature, and frequency with precision. Equipped with backlight, high sensitivity, and easy-to-use design.

Meet the Fluke 1734 Three-Phase Energy Logger – your go-to tool for easy, accurate energy monitoring. Track voltage, current, power, and more with WiFi connectivity and real-time data via the Fluke Connect® app. Perfect for spotting energy waste and optimizing your facility’s efficiency. Ready to take control of your energy use?

CAT III 1000V Safety rating No contact AC voltage detection from 12 to 1000 VAC No metallic contact Compact size with pocket clip Red LED Voltage level indication Audible alarm if voltage is present Built-in white LED light

The Megger MJÖLNER 200 is a portable micro-ohmmeter high current system integrated into a rugged hard case with on-board display and controls. The front panel provides DC+ and COM terminals, dedicated sense inputs, shunt output, current clamp input, and labeled interface ports for field testing configurations.

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

AEMC PowerPad III power quality analyzer supports electrical diagnostics, power monitoring, harmonics, alarms, transients, and energy analysis for single- or three-phase networks.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

Megger DLRO10 digital microhmmeter provides 10A low-resistance testing from 0.1 μΩ to 2000 Ω with Kelvin accuracy, automatic forward/reverse current, inductive mode, P-Type twist probes, 3m hook leads, and hard case.

Diagnose with precision! The Fluke 124B Industrial ScopeMeter is a powerful 40 MHz handheld oscilloscope designed for efficient troubleshooting in industrial settings. Learn more and upgrade your toolkit today!

The Amprobe PRM-6 Phase Sequence and Motor Rotation Tester verifies 3-phase wire sequence and motor rotation direction in commercial and industrial electrical systems. It supports phase-to-phase voltage measurement up to 700 V and features non-contact wireless motor rotation detection for running motors. A backlit LCD display provides clear indication of phase rotation and error conditions. Rated CAT IV 600 V, the PRM-6 is designed for use on electrical systems requiring reliable phase sequence and rotation confirmation.

Amprobe PRM-6 tester verifies phase sequence and motor rotation with wireless non-contact detection and CAT IV 600 V safety.

Fluke 1587 MDT FC kit combines insulation testing, True-RMS multimeter functions, AC current measurement, and phase rotation checks for advanced motor diagnostics.

Fluke I5S-PR: Compact 5A AC current clamp delivers accurate, non-intrusive measurements for Fluke 1750 Power Recorder and ScopeMeter tools.