Search results for: 'diều sáo'

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

350 pcs of 22 AWG solid wires Pre-cut, Pre-stripped and Pre-formed on each end. Variety of colors Completely Reusable 14 lengths x 25pcs each (2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125mm)

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

Fluke 190-502-III ScopeMeter delivers 500 MHz bandwidth, 5 GS/s sampling, CAT IV safety, and portable oscilloscope performance for industrial troubleshooting.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

INNO Instrument SPA1000 digital power meter with 1 power channel, AC/DC measurement, 100 kHz bandwidth, up to 1000 V and 20 A input, 4-item LED display, and harmonic measurement to the 100th order.

Fluke 3310-PR-TF-II Thin Flex Probe: Measures up to 5000A AC with flexible 24" cable, ideal for hard-to-reach areas and high-current applications.

AEMC 5233 Digital Multimeter: TRMS accuracy, NCV safety, and versatile functions—engineered for pros in electrical, HVAC, and electronics testing.

AEMC MTX 3290 Multimeter: Waterproof TRMS meter for measuring voltage, current, resistance, temp & more. Rugged IP67 body, CAT IV safety, and 6000-count LCD display.

Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3‑Wire, 120Volt AC.

Fluke 190-062-III-S ScopeMeter: Rugged 60 MHz 2-channel oscilloscope with intelligent triggering, FFT analysis, and built-in multimeter.

The Fluke IB875K kit pairs the rugged 87V True-RMS multimeter with insulated hand tools for safe, accurate industrial troubleshooting. It handles complex signals, VFD applications, and demanding environments while the included tools support high-voltage maintenance tasks.

Introducing the OWON TAO3102 2-Channel 8-bit 100MHz Tablet Oscilloscope

CAT III 1000V Safety rating No contact AC voltage detection from 12 to 1000 VAC No metallic contact Compact size with pocket clip Red LED Voltage level indication Audible alarm if voltage is present Built-in white LED light

AEMC Ground Resistance Tester 4620: Reliable earth resistance testing with auto-ranging, high interference rejection & a rugged field-ready design.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

The Fluke 17B+ DMM offers 1000V/10A measurement, temperature testing, a frequency range up to 100 kHz, and a bright backlit display for reliable daily electrical work.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

AEMC SR182 AC Current Probe: Works with 6471/6472 testers for selective or stakeless ground resistance testing. 40A range, 13ft (4m) lead with CA connector.

AEMC MN05 AC current probe with dual ranges 10A & 100A, voltage outputs 1mV/A & 1mV/mA, compact design with 5 ft lead for tight spaces and low current use.

AEMC MTX 3291 Multimeter: Waterproof TRMS 60000-count multimeter with USB, backlit LCD, AC/DC measurement, temp, duty cycle & IP67 safety for rugged field use.

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display