Search results for: 'rated'

The Fluke 374 FC delivers advanced troubleshooting with wireless connectivity, True-RMS measurements, AC/DC current to 600 A (expandable to 2500 A w/ optional iFlex probe) and 1000 V voltage capability — built for industrial professionals.

Fluke 177 multimeter delivers True-RMS accuracy, backlit display, and CAT IV safety for fast, reliable electrical troubleshooting in any environment.

AEMC OX 5042B Handscope: Portable 3-in-1 oscilloscope, multimeter, and harmonic analyzer with 2 channels, 40MHz bandwidth, and advanced current probes.

AEMC 5212 Multimeter: TRMS 4000-count with NCV, VLowZ, backlight, auto range, and CAT III safety. Reliable AC/DC testing with diode, freq & more.

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Fluke 190-204-III CAL ScopeMeter offers 200 MHz bandwidth, four isolated channels, deep memory, and traceable calibration for advanced industrial troubleshooting.

AEMC MN72 Current Probe designed for Model 6424, enables accurate ground & bond testing with one-button operation, CAT IV 600V safety, and IP65 rating.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

AEMC C.A 6240 digital micro-ohmmeter for precise low-resistance and contact resistance testing. 4-wire Kelvin measurement with selectable test currents up to 10A, 1 µΩ resolution, onboard memory, and DataView® software support.

Fluke 117 Multimeter: True-RMS accuracy, non-contact voltage detection, and AutoVolt for faster AC/DC readings in demanding work environments.

AEMC AmpFlex 196A-24-BK waterproof IP67 sensor measures up to 10,000AAC. Compatible with Models 8435, 8436, PEL 105 & 115.

AEMC AmpFlex 193-24-BK sensor measures current safely up to 12,000AAC with a flexible design that's compatible with Models 3945, 8220, 8230, and PEL Series products.

Amprobe AMP-330 Clamp Meter: Accurate 1000A AC/DC, temperature, and flame sensor testing for motors, HVAC, and industrial electrical systems.

AEMC OX 9102 IV Handheld Oscilloscope with 2 isolated channels, a 100MHz bandwidth, 7” color touchscreen, FFT, and a remote control via Wi-Fi & Ethernet.

AEMC OX 9062 IV 60MHz is a rugged handheld 2-channel oscilloscope with 60 MHz bandwidth, a 7-inch touchscreen, FFT, power measurement, and remote control via Wi-Fi and Ethernet.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

Amprobe PM55A Pocket Multimeter offers AutoTect automatic AC/DC detection, non-contact voltage sensing, and versatile measurement functions in a compact design.

Fluke 88-5 automotive meter delivers precise voltage, current, and pulse width diagnostics for modern and hybrid vehicles with advanced recording features.

Fluke 1734/B Energy Logger: Accurately log three-phase electrical data with Fluke Connect, Wi-Fi, and Bluetooth for real-time energy monitoring.

The Fluke 376 FC is a high-capacity wireless clamp meter offering True-RMS AC/DC current up to 1000 A, an included iFlex flexible current probe extending range to 2500 A, full voltage capability to 1000 V, and wireless data logging — built for heavy-duty industrial environments.

AEMC 1060 Megohmmeter: Fully automated 1000V insulation tester with a digital and analog display, a RS-232 interface, and DataView software for advanced analysis.

AEMC 4000D-24 Digital FlexProbe® with a 24” sensor and 6ft lead offers TRMS AC current measurement up to 4000A, compact and easy for tight spaces.

Fluke 116/62 MAX+ kit combines an HVAC multimeter with microamp and temperature testing plus a rugged IR thermometer for fast, precise HVAC diagnostics.