Search results for: '600 5'

Model No. MT-1210 Digits 3-1/2 digits 1999 counts Accuracy 1.0% best accuracy DCV 200mV/2V/20V/200V ±(1.0%+2d)500V ±(1.2%+5d) ACV 200/500V ±(2.5%+10d) DCA 200μ/2mA/20mA/200mA ±(2.0%+5d) 10A ±(3.0%+5d) Resistance 200Ω/2K/20K/200KΩ ±(1.0%+5d) 2MΩ ±(1.5%+5d) Extra function

Fluke voltage probe set: Double-insulated, CAT III/IV rated, 500 MHz bandwidth for industrial and electronics testing with portable oscilloscopes.

Fluke 435-II power quality and energy analyzer for Class A three-phase testing, with PowerWave capture, transient analysis, harmonics, flicker, mains signaling, energy loss measurement, and power distribution troubleshooting.

AEMC SR759 AC current probe with selectable ranges (1A–1000A), mV/A output, 5 ft lead. High accuracy and sensitivity for power quality and low current use.

AEMC OX 9062 IV 60MHz is a rugged handheld 2-channel oscilloscope with 60 MHz bandwidth, a 7-inch touchscreen, FFT, power measurement, and remote control via Wi-Fi and Ethernet.

AEMC MTX 3291 Multimeter: Waterproof TRMS 60000-count multimeter with USB, backlit LCD, AC/DC measurement, temp, duty cycle & IP67 safety for rugged field use.

AEMC MA114 MiniFlex® 14" Rogowski Coil — Flexible AC Current Sensor for Tight Spaces, Measures Up to 3000A, CAT IV 600V Rated

High-performance AEMC JM861 AC current probe with 3 ranges (30A, 300A, 3000A), low phase shift, BNC output, ideal for oscilloscopes & power quality analysis.

Diagnose with precision! The Fluke 124B Industrial ScopeMeter is a powerful 40 MHz handheld oscilloscope designed for efficient troubleshooting in industrial settings. Learn more and upgrade your toolkit today!

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke I2500-18 flexible AC current probe enables accurate 2500A measurements with thin Rogowski coil design for tight spaces and hard-to-reach conductors.

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

AEMC SR701 1000A AC Current Probe with 1mA/A output, 52mm jaw, low phase shift, and wide frequency response. Ideal for DMMs, loggers, and power meters.

Megger MIT1025 Insulation Tester: Measure insulation resistance up to 10kV with advanced diagnostics. Fast, reliable, and built for high-performance testing.

AEMC SR182 AC Current Probe: Works with 6471/6472 testers for selective or stakeless ground resistance testing. 40A range, 13ft (4m) lead with CA connector.

Fluke oscilloscope delivers portable, high-performance waveform analysis with isolated inputs, TrendPlot, ScopeRecord, and FFT analysis.

Fluke 177 multimeter delivers True-RMS accuracy, backlit display, and CAT IV safety for fast, reliable electrical troubleshooting in any environment.

FLUKE-88-5/A Kit: Complete automotive multimeter combo with RPM, temperature, and advanced diagnostics for professional vehicle troubleshooting.

The Fluke 376 FC is a high-capacity wireless clamp meter offering True-RMS AC/DC current up to 1000 A, an included iFlex flexible current probe extending range to 2500 A, full voltage capability to 1000 V, and wireless data logging — built for heavy-duty industrial environments.

AEMC 6424 Ground Resistance Tester: Perform accurate 3-point testing with auto-ranging, LCD display, and color-coded terminals for easy hookup.

AEMC C.A 1725 Digital Tachometer: Precise contact and non-contact RPM, speed, and frequency measurements with optical sensor and wide range capability.

AEMC PowerPad III power quality analyzer supports electrical diagnostics, power monitoring, harmonics, alarms, transients, and energy analysis for single- or three-phase networks.