Search results for: 'kitty the'

Fluke 190 Series III ScopeMeter: Rugged portable oscilloscope with LCD, 5 GS/s sampling, deep memory, and industrial CAT III/IV safety rating.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

AEMC CM605 Clamp-on Meter measures AC/DC current up to 100A and voltage up to 600V with tapered jaws for tight spaces and auto-ranging accuracy.

AEMC MiniFlex® MA194-24-BK — Flexible Waterproof Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series. Replaces Cat #2140.78.

Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3‑Wire, 120Volt AC.

Fluke 302+ digital clamp meter delivers reliable 400A AC current and 600V AC/DC measurements in a compact handheld design with backlit display, built for everyday electrical troubleshooting and maintenance tasks.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

AEMC Ground Resistance Tester 4620: Reliable earth resistance testing with auto-ranging, high interference rejection & a rugged field-ready design.

The Fluke 378 FC is a premium wireless clamp meter featuring FieldSense non-contact voltage/current measurement, True-RMS AC/DC current to 1000 A (expandable to 2500 A with included iFlex probe), built-in power quality indicator and wireless data capabilities — optimized for advanced industrial power diagnostics.

AEMC 5212 Multimeter: TRMS 4000-count with NCV, VLowZ, backlight, auto range, and CAT III safety. Reliable AC/DC testing with diode, freq & more.

AEMC SR193-BK AC Current Probe: 1200A capacity, 10ft lead, 0.3% accuracy—perfect for PowerPad, PEL Series, L104 & L564 for high-precision AC current measurement.

AEMC MTX 3290 Multimeter: Waterproof TRMS meter for measuring voltage, current, resistance, temp & more. Rugged IP67 body, CAT IV safety, and 6000-count LCD display.

Compact, flexible AC current probe with dual range 300/3000A and selectable 10mV/A or 1mV/A outputs. Its 24" Rogowski coil fits tight spaces — ideal for use with DMMs, scopes, and power meters. Includes a 14" lead with banana plugs.

AEMC Ground Resistance Tester 4630: Digital, rugged, and auto-ranging—Ideal for soil resistivity and ground resistance tests even in tough environments.

AEMC MD301 AC Current Probe: 500A range with 1mVDC output, ideal for loggers and recorders. Rugged clamp with banana plugs and 5ft lead.

This solar ground fault locator pinpoints active PV faults up to 1500V using non-contact signal tracing and includes 1 year of Premium Care.

Fluke 789 ProcessMeter: Compact digital multimeter with built-in mA loop calibrator for fast, accurate troubleshooting of control loops.

3-1/2 digits 1999 counts 0.8% best accuracy Portable one-hand operation Data hold, low battery indication Max. jaw opening: 2 in.

Fluke 190-102-III CAL ScopeMeter combines a 100 MHz oscilloscope and DMM with CAT IV safety, deep memory, and traceable calibration for industrial use.

Fluke FLK-SMFT-1000/KIT PV analyzer and tester with I-V curve tracing, Auto Test Mode, IEC 62446-1 safety and performance checks for C&I solar systems.

AEMC MN72 Current Probe designed for Model 6424, enables accurate ground & bond testing with one-button operation, CAT IV 600V safety, and IP65 rating.

The Fluke 374 FC delivers advanced troubleshooting with wireless connectivity, True-RMS measurements, AC/DC current to 600 A (expandable to 2500 A w/ optional iFlex probe) and 1000 V voltage capability — built for industrial professionals.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

AEMC MTX 3291 Multimeter: Waterproof TRMS 60000-count multimeter with USB, backlit LCD, AC/DC measurement, temp, duty cycle & IP67 safety for rugged field use.