Search results for: 'designated、'

The Fluke A604510350 GEO Ground Earth Stake is an earth stake accessory designed for use with compatible Fluke ground resistance testers. This metal stake supports grounding and earth resistance testing applications and is identified as the GEO Earth Stake model.

AEMC Power & Energy Logger supports energy audits, power monitoring, load studies, alarms, reports, and multi-phase electrical system analysis.

Model No. MT-1210 Digits 3-1/2 digits 1999 counts Accuracy 1.0% best accuracy DCV 200mV/2V/20V/200V ±(1.0%+2d)500V ±(1.2%+5d) ACV 200/500V ±(2.5%+10d) DCA 200μ/2mA/20mA/200mA ±(2.0%+5d) 10A ±(3.0%+5d) Resistance 200Ω/2K/20K/200KΩ ±(1.0%+5d) 2MΩ ±(1.5%+5d) Extra function

Introducing the OWON HDS307S Handheld Digital Oscilloscope – A Compact Powerhouse of Versatility and Portability, Tailored Just for You.

Discover the OWON SDS1052 Super Economical Type Digital Oscilloscope - Precision Meets Affordability.

The Eagle Eye GFL-1000 Portable DC Ground Fault Locator identifies current leakage faults in DC systems up to 1000 V. It measures grounding resistance and distributed capacitance to locate faults while systems remain online.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Fluke 325 Clamp Meter: True RMS accuracy with AC/DC current to 400A, voltage to 600V, and temperature measurement—ideal for fast, reliable electrical troubleshooting.

Fluke 190-062-III-S ScopeMeter: Rugged 60 MHz 2-channel oscilloscope with intelligent triggering, FFT analysis, and built-in multimeter.

AEMC OX 9062 IV 60MHz is a rugged handheld 2-channel oscilloscope with 60 MHz bandwidth, a 7-inch touchscreen, FFT, power measurement, and remote control via Wi-Fi and Ethernet.

AEMC 4000D-24 Digital FlexProbe® with a 24” sensor and 6ft lead offers TRMS AC current measurement up to 4000A, compact and easy for tight spaces.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

AEMC MN193-BK AC Current Probe: Dual range 5A/100A, measures from 5mA to 120A, 10ft lead—designed for PowerPad, PEL Series, L104 & L56 applications.

AEMC MN307 AC Current Probe: Measures up to 12A with 100mV/A output. Compact design with banana plug lead, ideal for low AC current and leakage measurements.

AEMC SR651 AC Current Probe: Measures up to 1000A with 1mV/A output, banana jack connectors, low phase shift, ideal for power and harmonic meters.

AEMC 407 TRMS Clamp Meter: Measure AC/DC volts & amps, power, harmonics, THD, and record 1000 readings. Rugged, IP54, CAT IV 1000V safety rated.

Pomona 6086 ESD Wrist Strap Tester: Ensure static control with a quick touch. Audible & visual alerts, easy mounting, and 120V power for reliable testing!

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

AEMC 5100.11 Universal Spline Adapter: Reliable replacement for Model 275HVD, fits in place of discontinued 5100.08 spline adapter.

Fluke 116/62 MAX+ kit combines an HVAC multimeter with microamp and temperature testing plus a rugged IR thermometer for fast, precise HVAC diagnostics.

The Fluke 117/PRV240 Digital Multimeter and Proving Unit Kit delivers reliable, professional-grade testing for electricians, technicians, and safety inspectors. Designed for “Test Before Touch” (TBT) verification, it ensures your tools are working correctly before exposure to live circuits—reducing shock risk and improving field safety.