Search results for: 'on hgt'

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

Fluke T+PRO-1AC combines a full-featured electrical tester with a non-contact AC voltage detector for safe AC/DC testing, continuity checks, GFCI testing, and fast live circuit detection.

The Fluke LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit combines the LinkIQ Cable+Network Tester, IntelliTone Pro 200 probe, and Fluke 87V Industrial Multimeter in a single field-ready solution. It qualifies copper cabling up to 10GBASE-T using frequency-based measurements, performs switch and Ping diagnostics, and validates PoE negotiation and load delivery. The integrated multimeter supports electrical troubleshooting across industrial environments.

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

Fluke 87-5 CAL Industrial Multimeter: True RMS digital readings, fast peak capture, low-pass filter support, and backlit display for efficient troubleshooting.

Introducing the OWON HDS4202M-N Handheld Digital Oscilloscope – Precision, Portability, and Versatility Unleashed.

AEMC 6522 Digital Megohmmeter: Insulation, continuity, and voltage testing with a backlit dual display, test lock, and a timed measurement mode.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

Fluke 179 multimeter with a built-in thermometer, true-RMS accuracy, and CAT III 1000 V/CAT IV 600 V safety rating for professional diagnostics.

AEMC 4620 Ground Resistance Tester Kit 500ft: Rugged digital tester with auto-ranging, interference rejection, and backlit LCD for precise soil resistivity tests.

Fluke VPS41 Voltage Probe Set: High-performance probes for 120B Series. Accurate measurements, CAT IV rated, and built to last for industrial and professional use.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

The Fluke 1625-2 KIT is a full-featured ground/earth system tester kit offering all four measurement methods (3-/4-pole fall-of-potential, soil resistivity, selective, and stakeless), storing up to 1,500 records and included in a professional hard-kit format for power-utility, industrial and commissioning applications.

The AEMC 6471 Ground Resistance Tester Kit 500ft comes with a rechargeable battery, DataView software, and versatile 2- to 4-point earth resistance measurement.

Fluke MDA-550-III: Advanced motor drive analyzer for fast troubleshooting, harmonics testing, and voltage analysis with guided connections.

Fluke 190 Series III ScopeMeter: Rugged portable oscilloscope with LCD, 5 GS/s sampling, deep memory, and industrial CAT III/IV safety rating.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

Fluke SMFT-1000 PRO delivers complete PV safety and performance testing with I-V curve tracing, irradiance measurement, and IEC 62446-1 compliance.

AEMC ALS-1 AC Line Splitter: Boost clamp meter sensitivity with X1 and X10 clamp positions plus voltage checking for safe, accurate current measurement.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.