Search results for: 'automaker'

AEMC 205 Power Clamp-On Meter: TRMS readings for AC/DC volts, amps, power, THD & phase. Built for tough jobs with flame-retardant body & IP54 rating.

AEMC CM605 Clamp-on Meter measures AC/DC current up to 100A and voltage up to 600V with tapered jaws for tight spaces and auto-ranging accuracy.

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

FLUKE-190-202-III Portable oscilloscope for industrial troubleshooting with 2x USB, Wi-Fi, and long-lasting Li-Ion battery.

Fluke 771 clamp meter: Measure 4–20 mA signals without breaking the loop, 0.2% accuracy, detachable clamp, and dual backlit display for easy troubleshooting.

Fluke 190 Series III ScopeMeter: Rugged portable oscilloscope with LCD, 5 GS/s sampling, deep memory, and industrial CAT III/IV safety rating.

Fluke oscilloscope delivers portable, high-performance waveform analysis with isolated inputs, TrendPlot, ScopeRecord, and FFT analysis.

Fluke 87-5 CAL Industrial Multimeter: True RMS digital readings, fast peak capture, low-pass filter support, and backlit display for efficient troubleshooting.

The Fluke IB875K kit pairs the rugged 87V True-RMS multimeter with insulated hand tools for safe, accurate industrial troubleshooting. It handles complex signals, VFD applications, and demanding environments while the included tools support high-voltage maintenance tasks.

The Fluke 87V multimeter delivers precision troubleshooting for VFDs, motor drives, and power systems with a low-pass filter, peak capture, and a backlit display.

Model No. MT-1210 Digits 3-1/2 digits 1999 counts Accuracy 1.0% best accuracy DCV 200mV/2V/20V/200V ±(1.0%+2d)500V ±(1.2%+5d) ACV 200/500V ±(2.5%+10d) DCA 200μ/2mA/20mA/200mA ±(2.0%+5d) 10A ±(3.0%+5d) Resistance 200Ω/2K/20K/200KΩ ±(1.0%+5d) 2MΩ ±(1.5%+5d) Extra function

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

Fluke ScopeMeter: Rugged oscilloscope for industrial waveform analysis with LCD, USB, Wi-Fi, and rechargeable Li-Ion battery for field use.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

The AEMC PEL 52 Power & Energy Logger records voltage, current, power, energy, power factor, frequency, and THD for single and split-phase monitoring.

Boost energy efficiency with the Fluke 1735 Power Logger! Perfect for three-phase load studies & electrical troubleshooting. Learn more and optimize your systems today! 

The INNO Instrument SPA3100 is a compact 3-channel digital power meter designed for accurate power consumption testing across appliances, industrial equipment, and automation systems. It combines touchscreen operation, internal storage, and broad AC/DC measurement capability in a bench-friendly format.

Introducing the OWON SDS1202 Super Economical Type Digital Oscilloscope – Precision Redefined.

Introducing the OWON SDS1104 Super Economical Type Digital Oscilloscope – Unleash Precision with Fourfold Power.