Search results for: 'provides of it'

Fluke oscilloscope delivers portable, high-performance waveform analysis with isolated inputs, TrendPlot, ScopeRecord, and FFT analysis.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Fluke I800 Clamp Probe: Extend DMM current measurement up to 800A AC with high accuracy, CAT III 600V safety, and wide 30Hz–10kHz frequency range.

Amprobe CT235A AC/DC clamp transforms high current up to 1000A into safe millivolt signals for precise measurements with meters and data loggers.

Fluke T150 two-pole voltage and continuity tester delivers fast AC/DC measurements from 6–690V with backlit LCD, switchable load, resistance testing, and multi-mode voltage indication for electrical diagnostics.

Fluke SOL-INS87-KIT delivers complete PV testing with I-V curve tracing up to 1500V, insulation testing, clamp measurements, and multimeter diagnostics.

Fluke 1555 FC insulation tester delivers up to 10 kV testing with data storage, leakage current measurement, and enhanced CAT IV safety.

Fluke LVD2 detects AC voltage from 90 to 600 V with dual sensitivity and LED flashlight. Safe CAT IV 600 V rating for industrial and commercial use.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Amprobe PM55A Pocket Multimeter offers AutoTect automatic AC/DC detection, non-contact voltage sensing, and versatile measurement functions in a compact design.

Fluke 325 Clamp Meter: True RMS accuracy with AC/DC current to 400A, voltage to 600V, and temperature measurement—ideal for fast, reliable electrical troubleshooting.

Amprobe PRM-6 tester verifies phase sequence and motor rotation with wireless non-contact detection and CAT IV 600 V safety.

Amprobe DGC-1000A Ground Resistance Tester delivers fast clamp-on testing from 0.025–1500 Ω with true-RMS current measurement and onboard data logging.

Fluke I2000 FLEX AC current clamp adapter measures up to 2000 A using Rogowski technology for flexible, non-intrusive current measurement.

Fluke a283FC wireless current clamp measures AC and DC current up to 60 A with True-RMS accuracy and CAT III 1500 V safety for remote testing.

AEMC ALS-1 AC Line Splitter: Boost clamp meter sensitivity with X1 and X10 clamp positions plus voltage checking for safe, accurate current measurement.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC PowerPad Model 8436 Power Quality Analyzer supports power quality diagnostics, trend recording, alarms, transients, and electrical network analysis.

The INNO Instrument SPA3100 is a compact 3-channel digital power meter designed for accurate power consumption testing across appliances, industrial equipment, and automation systems. It combines touchscreen operation, internal storage, and broad AC/DC measurement capability in a bench-friendly format.

Experience unparalleled signal analysis with the OWON XDS3064AE Touchscreen Digital Oscilloscope. This advanced instrument is designed to enhance your analytical tasks, ensuring accuracy and convenience at every step.

Introducing the OWON HDS4202M-N Handheld Digital Oscilloscope – Precision, Portability, and Versatility Unleashed.

Fluke 1734/B Energy Logger: Accurately log three-phase electrical data with Fluke Connect, Wi-Fi, and Bluetooth for real-time energy monitoring.

The Fluke 117/PRV240 Digital Multimeter and Proving Unit Kit delivers reliable, professional-grade testing for electricians, technicians, and safety inspectors. Designed for “Test Before Touch” (TBT) verification, it ensures your tools are working correctly before exposure to live circuits—reducing shock risk and improving field safety.