Search results for: '1.00'

350 pcs of 22 AWG solid wires Pre-cut, Pre-stripped and Pre-formed on each end. Variety of colors Completely Reusable 14 lengths x 25pcs each (2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125mm)

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Eagle Eye VGM-Series battery voltage and ground fault monitor with color touchscreen and Ethernet web interface for DC battery systems, delivering clear status monitoring and alarm output control.

Eagle Eye GFM-100 battery ground fault monitor with color touchscreen, Ethernet web interface, Modbus TCP/IP, and 4 Form C contacts for real-time monitoring of DC battery systems.

The Amprobe MO-100 Milliohm Meter offers accurate four-terminal resistance measurement with auto-hold, overvoltage protection, and a portable battery-powered design.

The Fluke 1587T Insulation Multimeter combines a digital insulation tester with a true-rms digital multimeter in one handheld instrument. Designed for telecom applications, it provides 50 V and 100 V insulation test voltages along with AC/DC voltage, millivolt, milliamp, resistance, and continuity measurements.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

Megger DLRO100 Low Resistance Ohmmeter: Precision testing for low resistance with 100A capacity, smooth DC output, and durable IP54/IP65 protection. Portable & reliable.

AEMC SR661 AC Current Probe: Selectable 10, 100, 1000A ranges, BNC output, wide frequency response, ideal for oscilloscopes and power measurements.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke VPS421-R High Voltage Probe Set: 100:1 ratio, 150MHz bandwidth, CAT IV 600V. Precision testing for high-voltage applications with top-tier safety!

Altronix AL100 UL Power Supply: Reliable 12V DC output for burglar alarm systems. Built-in battery backup and overload protection. Ensures continuous power in emergencies.

Amprobe ACDC-100 clamp-on multimeter measures high AC/DC current with inrush capture, capacitance testing, and a large easy-to-read display.

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Fluke FEV100/BASIC EVSE tester simulates an electric vehicle to verify charging station safety, run GFCI tests, and check voltage, duty cycle, and grounding.

The Amprobe ACDC-100 TRMS Clamp Meter delivers accurate AC/DC current, voltage, and resistance testing with True RMS, data hold, and backlit display.

Fluke 190-102-III CAL ScopeMeter combines a 100 MHz oscilloscope and DMM with CAT IV safety, deep memory, and traceable calibration for industrial use.

Fluke FLK-100-CLKT IR window offers arc-resistant 4-inch C-Range inspection access with Kwik Twist design, IP65 rating, and CLIRVU coating for clear thermal imaging.

AEMC MN05 AC current probe with dual ranges 10A & 100A, voltage outputs 1mV/A & 1mV/mA, compact design with 5 ft lead for tight spaces and low current use.

Fluke VPS421-B 100:1 Voltage Probe Set – High-precision, 150MHz bandwidth, CAT IV 600V rated. Ideal for high-voltage troubleshooting!

The Amprobe VP-440 detects AC voltage from 100–1000V using a safe, non-contact method with visual indication and CAT III 1000V safety rating.

AEMC OX 9102 IV Handheld Oscilloscope with 2 isolated channels, a 100MHz bandwidth, 7” color touchscreen, FFT, and a remote control via Wi-Fi & Ethernet.