Search results for: '300'

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

Flexible Rogowski AC current sensor with 120" coil length. Dual range 300/3000A AC with 100mV/A and 10mV/A output. Ideal for large bus bars and cable bundles. Compatible with DMMs, loggers, and power meters.

AEMC High-frequency flexible AC current probe with a 10" sensor, measuring 0.5A to 300A with 1% accuracy. Offers excellent frequency response up to 1MHz, low phase shift, and overload protection. Ideal for oscilloscopes with BNC input, power measurements, and confined spaces.

AEMC HX0130 PROBIX PRHX1 1/10 Probe offers 500MHz bandwidth for precise voltage measurements. Designed for OX Series with CAT III 300V rating.

Amprobe TIC 300 PRO: MSHA-certified, non-contact voltage tester with VolTect™ alert for safe detection from 30 VAC to 122 kV in industrial and utility use.

Megger MOM3 handheld micro-ohmmeter rated up to 300 A for low-resistance measurement. Auto range covers 0.1 µΩ to 3000 mΩ with selectable 5–300 A test current. Battery-operated IP54 instrument with USB-C PC communication and pass/fail threshold setting.

The Amprobe TIC 300 PRO/KIT: Detects AC voltage up to 122kV with VolTect alerts and self-test. Rugged, safe, and MSHA certified for industrial use.

High-performance AEMC JM861 AC current probe with 3 ranges (30A, 300A, 3000A), low phase shift, BNC output, ideal for oscilloscopes & power quality analysis.

Amprobe RS-3 PRO: CAT IV 300A analog clamp meter for AC current, voltage, and resistance testing. Reliable, rugged, and battery-free for volts/amps.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

AEMC OX 9304 IV Oscilloscope: Rugged 4-channel 300MHz handheld scope with large LCD, FFT, DMM, Wi-Fi, SD support, and remote access control.

AEMC 6472 Ground Resistance Tester Kit: Precision testing for soil resistivity, bond resistance, and earth potential with a 300ft (91.44m) cable and USB software support.

AEMC 4620 Digital Ground Resistance Tester Kit 300ft: Rugged, auto-ranging earth ground and soil resistivity tester with high interference rejection for accurate results.

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

AEMC 6424 Digital Ground Resistance Tester Kit 300ft: Accurate 3-point ground testing with auto-ranging, backlit LCD, and easy hookup for reliable earth resistance.

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

AEMC 6471 Digital Ground Resistance Tester 300ft Kit offers accurate earth resistance and soil resistivity testing with auto-ranging and rechargeable battery.

Fluke ST120+ GFCI Socket Tester with beeper verifies outlet wiring, detects common faults, and tests GFCI operation using bright LEDs and audible voltage alerts for faster, safer electrical checks.

Amprobe LH41A clamp-on ammeter delivers precise low-current measurement with 1 mA resolution, data hold, and CAT III 300 V safety.

AEMC MA114 MiniFlex® 14" Rogowski Coil — Flexible AC Current Sensor for Tight Spaces, Measures Up to 3000A, CAT IV 600V Rated

Introducing the OWON SDS9302V Deep Memory Digital Storage Oscilloscope – Precision Unleashed, Plus More.

Fluke 325 Clamp Meter: True RMS accuracy with AC/DC current to 400A, voltage to 600V, and temperature measurement—ideal for fast, reliable electrical troubleshooting.

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

Delivers fast point-to-point continuity testing for grounded pathways and long-distance connections with polarity reversal, lead compensation, programmable thresholds, and 300 V CAT IV safety.