Search results for: 'airi loid'

Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3‑Wire, 120Volt AC.

 Amprobe ST-102B tester checks receptacle wiring and GFCI functionality with clear light indicators for fast and reliable electrical safety verification.

Fluke LVD2 CT Volt Light detects 90–600 V AC without contact, using dual-sensitivity LED indicators and an ultra-bright flashlight for safe voltage checks.

Built-in white LED illumination light Detect AC voltage 90~1000 VAC with no metal contact Compact size with clip fits into pockets or tool pouches Red LED and audible alarm if voltage is present Non-conductive outer surface to avoid high voltage shock Powered by two 1.5V AAA batteries (not included) CAT IV 1000V Safety rating

AEMC 6610 Non-Contact Phase Meter: Detect phase rotation and open phases on 3-phase systems with LED alerts, buzzer, and a safe static induction design.

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

The Fluke T+PRO is an advanced electrical tester combining voltage, continuity, and resistance checks with a bright LED bar graph and dual-range measurement. It offers GFCI testing, audible indicators, and vibration feedback for safer troubleshooting in noisy or low-visibility environments.

The Megger NIM 1000 is a portable net impedance meter for low-voltage grid testing. It delivers adjustable 80–1000A test current and measures impedance, resistance, reactance, and PEN impedance with harmonic analysis to the 10th order, plus USB data export.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

Boost energy efficiency with the Fluke 1735 Power Logger! Perfect for three-phase load studies & electrical troubleshooting. Learn more and optimize your systems today! 

Fluke’s 1734/EUS is a three-phase electrical energy logger with Wi-Fi and flexible current probes, enabling continuous logging of voltage, current, power, energy, and power factor. Ideal for facility energy audits, load studies, and performance monitoring across distribution panels.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

Fluke 1777 Analyzer: Handheld three-phase power quality logging with automatic measurements, high-speed transients capture, and Bluetooth/Wi-Fi connectivity.

LED & HFE test Null DCV Capacitance measurement Overload protection Multi-Function Digital Multimeter Specifications Function Measurement Range DCV 0.1/2.5/10/50/250V, 1000V Null DCV DC ±5V/±25V ACV 10/50/250V, 1000V DCA 50μ/2.5m/25m/250mA, 10A Resistance ×1(0.2~2kΩ)/ ×10(2~20kΩ)/ ×100(20~200kΩ)/ ×1k(200~2MΩ)/ ×10kΩ(2k~20MΩ) Capacitance C(R×1k): 2000μF(Approx.) Max Battery Check 1.5V/9V, Product does not contain batteries Transistor hFE Test Yes Diode & LED Test Yes Continuity with Beeper Yes Front Panel Controls Range selector switch with “OFF” position, 0Ω adjust knob Power Source AAA(1.5V) x 2pcs and 9-Volt x 1pcs

INNO Instrument SPA2000 digital power meter with 1 power channel, up to 1000 V and 50 A measurement, DC to 100 kHz bandwidth, 4-display LED readout, harmonic analysis to the 100th order, and USB, Ethernet, RS-232/GPIB, and D/A interfaces.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

The Fluke PRV240 is a portable, battery-powered proving unit that supplies a stable 240 V AC/DC source to verify multimeter and tester operation before and after energized work. It helps meet safety requirements, reduces risk, and ensures instruments are functioning properly in the field.

Megger MIT525 insulation resistance tester applying DC test voltages to 5 kV for evaluation of electrical insulation in cables, motors, transformers, and switchgear. Supports IR, timed IR, DAR, PI, dielectric discharge, stepped voltage, and ramp tests with onboard memory and USB data transfer.

AEMC 2135.71 AC Current Probe delivers MN82 current measurement for AEMC 6471/6472 ground resistance testing, including selective and stakeless ground electrode workflows.

Fluke 116/62 MAX+ kit combines an HVAC multimeter with microamp and temperature testing plus a rugged IR thermometer for fast, precise HVAC diagnostics.

AEMC 400D-24 Digital FlexProbe®: True RMS AC current tester with 24ft flexible sensor, 400A range, ideal for tight spaces and CAT IV 600V safety rating.