Search results for: 'mechanical goods'

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

Phase 3 PowerSafe PD5-E: 800A sequential mating box for safe, error-free power distribution. Ideal for events, generators & industrial use!

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

AEMC C.A 1725 Digital Tachometer: Precise contact and non-contact RPM, speed, and frequency measurements with optical sensor and wide range capability.

Repl Shaft & Bearing, Small

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Toshiba MG150M2CK1 NPN power transistor module engineered for high-current switching. Designed for motor control and UPS systems, featuring an isolated case and dual-element bipolar architecture.

Fluke 123B/NA/S ScopeMeter: Rugged handheld oscilloscope with multimeter and recorder, dual-input testing, TFT display, USB, Wi-Fi, and rechargeable battery.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

Amprobe AMP-320 clamp meter measures 600 A AC/DC with True RMS, temperature, motor rotation, inrush current, and HVAC-ready diagnostics.

AEMC 6611 Phase & Motor Rotation Meter: Identify phase order, motor direction, and live/open phases on 3-phase systems. Ideal 6609 replacement.

AEMC C.A 1727 Digital Tachometer: Contact/non-contact RPM and speed readings with USB data transfer, 4000-point memory, and high-accuracy performance.

Megger DLRO10 digital microhmmeter provides 10A low-resistance testing from 0.1 μΩ to 2000 Ω with Kelvin accuracy, automatic forward/reverse current, inductive mode, P-Type twist probes, 3m hook leads, and hard case.

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

AEMC 4630 Ground Resistance Tester Kit: Rugged, auto-ranging digital tester with 150ft leads, NiMH battery, and interference rejection for precise soil testing.

AEMC 4620 Digital Ground Resistance Tester Kit 150ft: Rugged, auto-ranging earth ground tester with backlit LCD for accurate resistance and soil tests.

AEMC AC/DC Current Probe Model MR6292: Accurate Hall effect probe with hook jaws for BSG mode current measurements. No battery needed; powered by Model 6292.

AEMC MN375 AC Current Probe: Compact 10A range with hooked jaw, 100mV/A output, banana plug lead, UL approved for precise power and low-level current use.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

AEMC Ground Resistance Tester 4630: Digital, rugged, and auto-ranging—Ideal for soil resistivity and ground resistance tests even in tough environments.