Search results for: 'the time'

LED & HFE test Null DCV Capacitance measurement Overload protection Multi-Function Digital Multimeter Specifications Function Measurement Range DCV 0.1/2.5/10/50/250V, 1000V Null DCV DC ±5V/±25V ACV 10/50/250V, 1000V DCA 50μ/2.5m/25m/250mA, 10A Resistance ×1(0.2~2kΩ)/ ×10(2~20kΩ)/ ×100(20~200kΩ)/ ×1k(200~2MΩ)/ ×10kΩ(2k~20MΩ) Capacitance C(R×1k): 2000μF(Approx.) Max Battery Check 1.5V/9V, Product does not contain batteries Transistor hFE Test Yes Diode & LED Test Yes Continuity with Beeper Yes Front Panel Controls Range selector switch with “OFF” position, 0Ω adjust knob Power Source AAA(1.5V) x 2pcs and 9-Volt x 1pcs

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Introducing the OWON HDS1022M-N Handheld Digital Oscilloscope – Where Precision Meets Portability, and Versatility Meets Convenience.

Fluke 287 multimeter: High-accuracy electronics logging with TrendCapture, real-time graphing, and Fluke Connect® compatibility for advanced diagnostics.

Megger MIT1025 Insulation Tester: Measure insulation resistance up to 10kV with advanced diagnostics. Fast, reliable, and built for high-performance testing.

Fluke FLK-SMFT-1000/KIT PV analyzer and tester with I-V curve tracing, Auto Test Mode, IEC 62446-1 safety and performance checks for C&I solar systems.

High Voltage Detector: Fast, reliable detection with ABS body, indoor/outdoor use, and quick response time. Ideal for high-voltage testing. Built for safety & durability.

Megger MIT525 insulation resistance tester applying DC test voltages to 5 kV for evaluation of electrical insulation in cables, motors, transformers, and switchgear. Supports IR, timed IR, DAR, PI, dielectric discharge, stepped voltage, and ramp tests with onboard memory and USB data transfer.

Diagnose with precision! The Fluke 124B Industrial ScopeMeter is a powerful 40 MHz handheld oscilloscope designed for efficient troubleshooting in industrial settings. Learn more and upgrade your toolkit today!

AEMC 6536 True Megohmmeter with variable 10-100V insulation testing, digital & analog display, continuity, resistance, and voltage measurements.

Fluke 1662 tester provides essential installation testing with insulation, continuity, loop, RCD and polarity checks, plus memory for storing onsite measurements.

Fluke 190-102-III CAL ScopeMeter combines a 100 MHz oscilloscope and DMM with CAT IV safety, deep memory, and traceable calibration for industrial use.

The Fluke 196C ScopeMeter is a high-performance oscilloscope designed for demanding applications. It offers specifications typically found on top-end bench instruments, including a dual input, 100 MHz bandwidth, and 1 GS/s real-time sample rate. With a high-resolution color display and 3000 data points per channel waveform resolution, it provides accurate and detailed waveform analysis. The scope features Connect-and-View automatic triggering, manual trigger modes, external triggering options, frequency spectrum analysis using Fast Fourier Transform, and digital persistence for analyzing complex dynamic waveforms. Its fast display update rate allows for real-time observation of dynamic behavior.

AEMC 6522 Digital Megohmmeter: Insulation, continuity, and voltage testing with a backlit dual display, test lock, and a timed measurement mode.

Fluke FLK-3000FC IND system offers wireless multimeter testing with current and voltage modules, remote monitoring, logging, and Fluke Connect integration.

Fluke FLK-289/FVF/IR3000 kit combines advanced logging, wireless sharing via Fluke Connect, and TrendCapture analysis for diagnosing complex electrical issues.

Amprobe ACD-10 PLUS clamp meter measures AC/DC voltage to 600V, AC current to 600A, with thin jaws for tight spaces and auto-ranging convenience.