Search results for: 'work 15'

Fluke 117/323 combo kit: Versatile multimeter and clamp meter with test leads, magnetic hanger, and carrying case for residential or commercial use.

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

Built-in white LED illumination light Detect AC voltage 90~1000 VAC with no metal contact Compact size with clip fits into pockets or tool pouches Red LED and audible alarm if voltage is present Non-conductive outer surface to avoid high voltage shock Powered by two 1.5V AAA batteries (not included) CAT IV 1000V Safety rating

The Fluke 87V MAX E2 Kit offers a rugged true-RMS multimeter with an IP67 rating, 4 m drop protection, long battery life, and essential insulated accessories for industrial use.

Fluke RS-1007 PRO Analog Clamp Meter: CAT IV 600V rated, measures AC current, voltage, resistance, and continuity without battery for main functions.

Fluke 87V IMSK Kit: True-RMS multimeter and AC current clamp for precise electrical testing, with temperature probe and CAT IV 600V safety rating.

Fluke 289 Multimeter: Capture up to 15,000 events with TrendCapture, zoom analysis, and remote sharing via Fluke Connect for complex troubleshooting.

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

Boost energy efficiency with the Fluke 1735 Power Logger! Perfect for three-phase load studies & electrical troubleshooting. Learn more and optimize your systems today! 

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

AEMC MTX 3290 Multimeter: Waterproof TRMS meter for measuring voltage, current, resistance, temp & more. Rugged IP67 body, CAT IV safety, and 6000-count LCD display.

Fluke 287 multimeter: High-accuracy electronics logging with TrendCapture, real-time graphing, and Fluke Connect® compatibility for advanced diagnostics.

Fluke T5-1000 tester measures voltage, continuity, and current up to 100 A with OpenJaw design and Slim Reach probes for tight spaces.

Fluke FLUKE-355 Clamp Meter: High-current True-RMS AC/DC measurements up to 2000A with wide jaw capacity, surge capture, and CAT IV safety for demanding electrical work.

Fluke 113 multimeter offers fast low-impedance VCHEK testing with AC/DC voltage detection, continuity checks, a bright backlit display, and CAT IV 600 V safety rating.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

The AEMC 6555 is a 15kV digital megohmmeter for insulation testing on motors, cables, and electrical apparatus. It supports fixed/variable voltage tests, step and ramp profiles, automatic DAR/PI/DD ratios, on-screen graphs, and USB/DataView reporting with storage for up to 80,000 points.

AEMC 6612 Phase Rotation Meter: Accurately detects 3-phase rotation and live/open phases. LCD display. Ideal 6608 replacement for motor setup.

High Voltage Detector: Fast, reliable detection with ABS body, indoor/outdoor use, and quick response time. Ideal for high-voltage testing. Built for safety & durability.

Fluke 279FC/IFLEX thermal multimeter combines TRMS measurement with built-in thermal imaging, iFlex current capability, and wireless Fluke Connect reporting.

AEMC 6522 Digital Megohmmeter: Insulation, continuity, and voltage testing with a backlit dual display, test lock, and a timed measurement mode.

AEMC 6418 Clamp-On Ground Resistance Tester: Fast, clamp-on testing with memory, alarm, and no auxiliary rods—ideal for reliable earth measurements.

AEMC JM810A AC Current Probe — 2000A Range, 1mA/A Output, Low Phase Shift, Banana Plug Lead — Ideal for DMMs, Power, and Harmonic Meters

Fluke voltage tester detects 90–1000V AC with audible/visual alerts, CAT IV rated. Easy, pocket-sized tool for fast electrical checks.

AEMC 6526 Digital Megohmmeter: Insulation, resistance, voltage, and continuity testing with Bluetooth, memory, alarms & bargraph display.