Search results for: 'anti aui a up'

Fluke 116/323 KIT delivers HVAC multimeter and clamp meter performance with microamp testing, built-in thermometer, and True-RMS accuracy for fast diagnostics.

Fluke T5-600 tester offers fast AC/DC voltage, continuity, and 100 A current checks with OpenJaw™ design and detachable SlimReach™ probes.

Amprobe 37XR-A digital multimeter delivers True RMS accuracy with component and logic testing, backlit display, and CAT III 600 V safety.

The Fluke 1587/I400 FC pairs a full-featured 2-in-1 insulation tester and True-RMS digital multimeter with a 400 A AC current clamp. Designed for maintenance, motor-drive, and electrical system diagnostics, it offers insulation resistance testing, voltage/current measurements, and clamp-based AC current readings in a single kit

Fluke 289 multimeter: True-RMS logging for industrial, electrical, and electromechanical systems with TrendCapture and remote Fluke Connect support.

Fluke 789 ProcessMeter: Compact digital multimeter with built-in mA loop calibrator for fast, accurate troubleshooting of control loops.

The Fluke 17B+ DMM offers 1000V/10A measurement, temperature testing, a frequency range up to 100 kHz, and a bright backlit display for reliable daily electrical work.

Amprobe ACD-10 PLUS clamp meter measures AC/DC voltage to 600V, AC current to 600A, with thin jaws for tight spaces and auto-ranging convenience.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

Fluke 28 II Digital Multimeter: Rugged, IP67 waterproof and dustproof, with true-RMS readings, high-accuracy voltage, current, and temperature measurements.

Fluke 87V MAX multimeter: Rugged IP67 design, drop-tested to 4m, with True-RMS accuracy and built-in thermometer for extreme conditions.

Fluke 279FC I/B Thermal Multimeter combines True-RMS measurements with built-in thermal imaging and wireless Fluke Connect for safer troubleshooting.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

AEMC OX 5042B Handscope: Portable 3-in-1 oscilloscope, multimeter, and harmonic analyzer with 2 channels, 40MHz bandwidth, and advanced current probes.

Fluke Wireless General Maintenance System: Fast, safe, and easy electrical panel testing with multi-module AC voltage and current measurements.

Fluke 77 IV Multimeter: Accurate AC/DC measurement up to 1000 V with backlit display, auto/manual ranging, and ergonomic design for field or bench use.

Reliable AEMC 5233 Digital Multimeter: Measure AC/DC currents, temperature, and frequency with precision. Equipped with backlight, high sensitivity, and easy-to-use design.

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

Fluke FLK-3000FC IND system offers wireless multimeter testing with current and voltage modules, remote monitoring, logging, and Fluke Connect integration.

Fluke 116 HVAC Multimeter: Built-in thermometer, microamps for flame sensors, True RMS accuracy, and bright backlight for fast HVAC troubleshooting.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

Introducing the OWON XDM3041 4-1/2 Digits Bench-Type Digital Multimeter: Precision Meets Performance.

Fluke FLK-A3001FC KIT delivers wireless multimeter and iFlex current measurement with logging, remote monitoring, and seamless Fluke Connect integration.

Fluke 88-5 automotive meter delivers precise voltage, current, and pulse width diagnostics for modern and hybrid vehicles with advanced recording features.

Fluke 3000 FC delivers wireless multimeter testing with remote monitoring, logging, and mobile connectivity for safer, faster electrical diagnostics.