Search results for: 'iso11137-2'

Eaton CHSPT2MICRO delivers reliable whole-home surge protection with Type 2 SPD performance, 36kA rating, and NEMA 4 durability for 120/240V panels.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

Philips Advance ICN-2P32-N Centium ballast delivers quiet, energy-efficient instant start operation for 1 or 2 F32T8 lamps in 120–277V commercial fixtures.

WOHLER External Battery Charger: The Power You Need, When You Need It

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

Philips Advance AmbiStar RELB-2S40-N delivers reliable, energy-efficient rapid-start operation for T12 lamps. Ideal for 120V fixtures needing a dependable electronic ballast.

Symbol 50-14000-008R delivers reliable 5.2VDC power for Symbol/Motorola barcode scanners and cradles, providing a compatible replacement for discontinued OEM adapters.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Fluke BP190 rechargeable NiMH battery pack delivers 7.2V power for ScopeMeter 190, 190C, and 430 Series instruments, providing reliable internal power with OEM-matched fit and capacity.

The Autel Robotics EVO II Car Charger is a fast and reliable charging solution for your drone and remote controller on the go. Charge in just 90 minutes and travel with peace of mind.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

Fluke BP7240 Li-Ion Battery delivers reliable 7.2V power for 75x calibrators with fast recharge and multiple-use convenience.

AEMC 2153.8 Replacement NiMH rechargeable battery with 4.2AH capacity for DL913 and DL914 data loggers, ensuring reliable power and long runtime.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The Inno Instrument USB-10P is a DC power cable featuring a USB Type-C connector on one end and a USB Type-A connector on the other. It is designed for powering and charging compatible Inno Instrument fiber optic equipment that utilizes a Type-C power input interface.

Fluke TI-SBP3 rechargeable smart battery pack delivers 7.4V power for compatible Fluke thermal imagers, offering field-swappable convenience and extended runtime.

The INNO Instrument LI-ION 225 is a lithium-ion replacement battery designed for use with the INNO Instrument View600 Optical Time Domain Reflectometer (OTDR). This battery provides portable power for field testing environments where the View600 OTDR is deployed for fiber optic network verification and troubleshooting.

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

Phase 3 PowerSafe PD5-E: 800A sequential mating box for safe, error-free power distribution. Ideal for events, generators & industrial use!