Search results for: 'periodo'

AEMC 2153.8 Replacement NiMH rechargeable battery with 4.2AH capacity for DL913 and DL914 data loggers, ensuring reliable power and long runtime.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

Symbol 50-14000-008R delivers reliable 5.2VDC power for Symbol/Motorola barcode scanners and cradles, providing a compatible replacement for discontinued OEM adapters.

AEMC 2135.93 USB charger cable with wall plug delivers replacement charging support for the AEMC Model 6424 Ground Tester.

AEMC 2153.78 USB Wall Plug Adapter replacement for models L452, 1510, MH60 and compatible with multiple test equipment series.

Fluke TI-SBC3B charging base powers and charges Ti-SBP3 rechargeable battery packs used in Fluke thermal and infrared cameras.

Fluke BP7235 NiMH battery pack delivers reliable 7.2V power with 3500 mAh capacity, providing up to 16 hours of runtime for compatible Fluke calibrators.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

Fluke PLS RBP5 rechargeable battery pack delivers extended runtime for compatible PLS laser levels, reducing downtime and eliminating disposable batteries while supporting multiple PLS handheld laser models.

AEMC 5100.15 Replacement 1000V PA32ER Power Supply for Model 8345, compatible with PowerPad IV 8345, 9000 Series Oscilloscopes, and C.A 6117.

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The Autel Robotics EVO II Car Charger is a fast and reliable charging solution for your drone and remote controller on the go. Charge in just 90 minutes and travel with peace of mind.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Schneider Electric APC SMT1000C 1000VA/700W line-interactive UPS with sine-wave output, SmartConnect cloud monitoring, LCD interface, automatic voltage regulation, and 8 NEMA 5-15R outlets.

Eaton CHSPT2MICRO delivers reliable whole-home surge protection with Type 2 SPD performance, 36kA rating, and NEMA 4 durability for 120/240V panels.

Fluke TI-SBP3 rechargeable smart battery pack delivers 7.4V power for compatible Fluke thermal imagers, offering field-swappable convenience and extended runtime.

Philips Advance AmbiStar RELB-2S40-N delivers reliable, energy-efficient rapid-start operation for T12 lamps. Ideal for 120V fixtures needing a dependable electronic ballast.