Search results for: 'used'

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Fluke BP7240 Li-Ion Battery delivers reliable 7.2V power for 75x calibrators with fast recharge and multiple-use convenience.

Fluke TI-SBC3B charging base powers and charges Ti-SBP3 rechargeable battery packs used in Fluke thermal and infrared cameras.

Fluke Networks LIQ-BATTERY lithium-ion replacement battery delivers reliable 3.5 V power for LinkIQ Cable+Network Tester and FI-3000 FiberInspector Pro.

Fluke PLS RBP5 rechargeable battery pack delivers extended runtime for compatible PLS laser levels, reducing downtime and eliminating disposable batteries while supporting multiple PLS handheld laser models.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

Fisher TW9KTX-CHGR is a lithium-ion charger kit for the TW9000 transmitter. It charges TW9KTX-BATT batteries via an AC-powered cradle, ensuring reliable, field-ready operation.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

The INNO Instrument LI-ION 225 is a lithium-ion replacement battery designed for use with the INNO Instrument View600 Optical Time Domain Reflectometer (OTDR). This battery provides portable power for field testing environments where the View600 OTDR is deployed for fiber optic network verification and troubleshooting.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

The Inno Instrument USB-10P is a DC power cable featuring a USB Type-C connector on one end and a USB Type-A connector on the other. It is designed for powering and charging compatible Inno Instrument fiber optic equipment that utilizes a Type-C power input interface.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

Phase 3 PowerSafe PD5-E: 800A sequential mating box for safe, error-free power distribution. Ideal for events, generators & industrial use!

AEMC 5000.57 Power Adapter 24VDC Charger: Reliable vehicle-use power adapter compatible with models 6470-B, 6471, and 6472 for seamless operation.

AEMC 5000.19 Replacement power adapter with 110/230V input and US power cord, compatible with models 8333, 8335, 8336, and C.A 6116.

AEMC 5000.13 power adapter and US power cord for reliable operation of ground testers models 6470, 6471, and 6472 with dual voltage support.