Search results for: 'users\'

The Hydrajaws Safety Lifeline Cable Tester Kit1 (Frame Only) for operators who already own an M2000 Tester, enables engineers to validate the installation of swaged components of new or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN, 370kN or 500kN hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

For M16 nuts, the bolt tester adaptor directly engages the nut in the pulling jaw.

The M35+ medium bridge is an optional extra that extends the Standard M35+ Digital Pull Tester to span 8.27 in and increases the capacity to 65kN (14,613 lbf). The leg height can also be extended with a further accessory set of 3 leg extensions

For testing threaded fixings when using the M2050 Pro Tester

HYTORC LST-2000 Lithium Series II torque tool with 36V battery drive, reaction arm, TorcSense torque measurement, and digital control interface for precision industrial bolting.

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 0.1~1.2 N-m Accuracy: +/-6.0% Graduation: 0.01 N-m OAL: 7.1"

Drive: 1/4"/6.3mm Square Unit: N-m/lbf.in Dual units Torque Range: 5.0~25 N-m/ 53~212 lbf.in Accuracy: +/-3.0 % Graduation: 0.2 N-m Gear teeth: 64 T OAL: 9.8"

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

For testing Hex bolts when using the M2050 PRO Tester.

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 5.0~10 Nm Accuracy: +/-6.0% Graduation: 0.1 N-m/lbf.in OAL: 7.9"

Drive: 1/2"/12.7mm Square Unit: N-m/lbf.in Dual units Torque Range: 60~340 N-m/ 52~243 lbf.ft Accuracy: +/-3.0 % Graduation: 2.0 N-m Gear teeth: 32 T OAL: 24"

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

The New M2000 Tester bridge. New design has height adjustable legs for quick and easy adjustment to suit the testing application.

The 600mm adjustable load spreading bridge is ideal for testing the installation of Constant Force Posts. Made of aluminium, it is easy and efficient to assemble, operate and store. It features three 650mm legs, with composite feet for load spreading, which will rotate through 360 degrees and adjust to 23 height positions. Max SWL: 25 kN/5,620.2 lbf

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.