Search results for: 'risks'

For attaching the tester to a secure anchor point to prevent it dropping to the ground. Includes a bungee tether, self-locking carabiner, a fixed anchorage plate and a PVC bag.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN, 370kN or 500kN hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

For M16 nuts, the bolt tester adaptor directly engages the nut in the pulling jaw.

Drive: 1/4"/6.3mm Square Unit: N-m/lbf.in Dual units Torque Range: 5.0~25 N-m/ 53~212 lbf.in Accuracy: +/-3.0 % Graduation: 0.2 N-m Gear teeth: 64 T OAL: 9.8"

The Hydrajaws M0095 Long Stroke Roofing Screw Tester Kit determines the strength and suitability of fixings in built-up roofing constructions where performance data is unavailable. The long stroke of 3.15'' means that once tested the fixing can be completely extracted.

Revolutionize your anchor testing with the Hydrajaws M35+! This lightweight, modular pull tester features Easi-Effort® technology for anchor and eyebolt testing up to 35kN (7,868 lbf) and swaged components on engineered lifeline systems testing up to 20kN (4,496 lbf).

For testing threaded fixings when using the M2050 Pro Tester

Looking for a reliable solution to test sleeve and stud anchors? Hydrajaws Threaded Stud Adaptors are your answer! Our adaptors are specifically designed to provide accurate and efficient testing of sleeve and stud anchors, ensuring the safety and stability of your structures.

Looking for a reliable solution to test sleeve and stud anchors? Hydrajaws Threaded Stud Adaptors are your answer! Our adaptors are specifically designed to provide accurate and efficient testing of sleeve and stud anchors, ensuring the safety and stability of your structures.

New for 2022 the M0097 Carry Case is lighter and more convenient. Includes inlay and document holder.

The Hydrajaws Pyramid Load Spreading Bridge offers greater stability and a wider area for unconfined testing on rough ground.

High quality bit at an economical price Made from S-2 tool steel with a hardness of HRC 59°~ 61°

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 0.1~1.2 N-m Accuracy: +/-6.0% Graduation: 0.01 N-m OAL: 7.1"

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 5.0~10 Nm Accuracy: +/-6.0% Graduation: 0.1 N-m/lbf.in OAL: 7.9"

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 1.0~6.0 N-m Accuracy: +/-6.0% Graduation: 0.1 N-m/lbf.in OAL: 7.9"

Drive: 1/4"/6.3mm Square Unit: N-m/lbf.in Dual units Torque Range: 3.0~15 N-m/ 31~128 lbf.in Accuracy: +/-3.0 % Graduation: 0.1 N-m Gear teeth: 64 T OAL: 8.3"

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.

Compact, cordless design for portability Safety cap turns off device when in place Heats up to temperature in 15-20 seconds Temperature up to 450°C/840°F Maintains soldering temperature at least 300°C/600°F Lead free solder wire (Ø1mm ) included Requires 3 x AA Batteries (not included)