Search results for: 'risks hand'

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN, 370kN or 500kN hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

Drive: 1/4"/6.3mm Square Unit: N-m/lbf.in Dual units Torque Range: 5.0~25 N-m/ 53~212 lbf.in Accuracy: +/-3.0 % Graduation: 0.2 N-m Gear teeth: 64 T OAL: 9.8"

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN (40466lbf), 370kN (83179lbf) or 500kN (112405lbf) hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 0.1~1.2 N-m Accuracy: +/-6.0% Graduation: 0.01 N-m OAL: 7.1"

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 1.0~6.0 N-m Accuracy: +/-6.0% Graduation: 0.1 N-m/lbf.in OAL: 7.9"

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.

New for 2022 the M0097 Carry Case is lighter and more convenient. Includes inlay and document holder.

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 5.0~10 Nm Accuracy: +/-6.0% Graduation: 0.1 N-m/lbf.in OAL: 7.9"

Drive: 1/4"/6.3mm Square Unit: N-m/lbf.in Dual units Torque Range: 3.0~15 N-m/ 31~128 lbf.in Accuracy: +/-3.0 % Graduation: 0.1 N-m Gear teeth: 64 T OAL: 8.3"

Compact, cordless design for portability Safety cap turns off device when in place Heats up to temperature in 15-20 seconds Temperature up to 450°C/840°F Maintains soldering temperature at least 300°C/600°F Lead free solder wire (Ø1mm ) included Requires 3 x AA Batteries (not included)

Drive: 1/2"/12.7mm Square Unit: N-m/lbf.in Dual units Torque Range: 40~200 N-m/ 33~144 lbf.ft Accuracy: +/-3.0 % Graduation: 1.0 N-m Gear teeth: 32 T OAL: 21"

For M16 nuts, the bolt tester adaptor directly engages the nut in the pulling jaw.