Search results for: 'installers'

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

The Fluke Networks DSX2-8000 CableAnalyzer is a copper certification tester for Cat 5e, 6, 6A, and 8 cabling. It certifies up to 2 GHz (TIA Level 2G / IEC Level VI) and supports 25G/40G copper Ethernet with fast test times and LinkWare™ reporting.

Fluke Networks DTX-PLA001 Adapter: Ensure top-tier network testing with this high-performance RJ-45 T568B adapter. Built for reliable, fast, and precise results.

Works with QuikThru CAT5/5e/6 connectors Easily sort and assure proper wiring configurations Reduce distance between wire twists and contacts Built-in cutter and stripper for flat and round cable Crimp and trim in one cycle! Works with solid or stranded wire View all QuikThru series tools and connectors.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

Replacement battery for 902-626 18V, 4 Ah Li-Ion

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The Fujikura FID-30R Optical Fiber Identifier is designed for fast, non-intrusive identification of active optical fiber lines and features an integrated OPM. By clamping directly onto the fiber, it detects the presence or absence of traffic signals, tone signals, and ONU signals without interrupting service, making it ideal for fiber optic installation, maintenance, and troubleshooting. 

Anritsu MT9090A OTDR Module: Compact, high-performance tool for precise fiber testing. Supports PON networks with tri-wavelength functionality. Ideal for installation and maintenance.

EXFO FTB-1v2 OTDR kit with installed FTBx-730C-SM8-OPM-EA module for fiber link testing, including iOLM operation and built-in PM/VFL hardware.

The INNO Instrument VIEW 12R Pro is a 12-fiber ribbon fusion splicer with motorized clamp alignment, 5-inch touch LCD, integrated heat oven, and Nano-SIM IoT/GPS support. It stores up to 10,000 splice records for ribbon and single-fiber applications.

Upgrade your fiber optic projects with this used INNO M9+ fusion splicer kit, featuring a standard V1 fiber cleaver and a low splice count for dependable performance. Don’t miss out—order from Cartoli now for quality and value!

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.