Search results for: 'new'

Fluke Networks replacement cord for TS52/44/42 test sets, featuring durable braided design and PRC pin clips for reliable phone line testing.

The Fluke Networks TS30 Test Set (30800009) features angled bed-of-nails (ABN) clips, high-impedance DataSafe™ monitoring for live lines, rugged DropSafe™ and RainSafe™ protection, audible ringer, tone/pulse dialing, and last-number redial—ideal for telecomm and outside-plant line work.

Fluke Networks telecom kit: Complete electrical contractor tool set with Pro3000 Tone & Probe, impact tool, cable stripper, and durable carrying case.

Fluke Pro-Tool Kit IS60: Complete cable installation and repair kit with impact tool, snips, stripper, Maglite, and durable carrying pouch.

Fluke MT-8200-49A MicroMapper: Handheld Ethernet tester for network pros, verifying twisted pair cabling quickly with LED indicators and tone tracing.

Fluke Networks D914 Impact Tool delivers precise cable termination with torque and impact combined, featuring built-in blade storage and adjustable impact levels.

Fluke Networks 4-Wire In-Line Modular Adapter: Test lines without service disruption, with clear markings, angled contacts, and easy probe access.

Fluke Networks VISIFAULT-FIBERLRT quickly locates fiber faults, checks polarity, and verifies continuity with rugged design and 80-hour battery life.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

The Fluke Networks CFM-TRC-S-MPO16U is a CertiFiber™ Max single-mode test reference cord (TRC) kit designed for testing MPO16 pinned fiber configurations. It is used with the CertiFiber Max Optical Loss Test Set (OLTS) to support standards-preferred one-jumper reference measurements.

The Fluke Networks TRC-SM-VERIFY-MMC24P is a reference-grade single-mode verification test reference cord designed for testing pinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It supports verification that the test reference has been set correctly using reference-quality fiber and connectors.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks MRC-50EFC-SCLCKITM is a multimode 50 µm Encircled Flux compliant test reference cord kit for optical loss measurements. The kit includes four 2 m reference-grade cords with metal LC connectors, designed for use with the Fluke CertiFiber Pro fiber tester.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

The Fluke Networks FTK2000 SimpliFiber Pro kit is a singlemode fiber verification solution combining an optical power meter with a 1310/1550 nm laser source. It supports fast power and loss testing for installed fiber links and includes essential accessories in a portable carrying case.

Fluke Networks FTK1200 is a SimpliFiber Pro multimode fiber verification kit with VisiFault. The kit includes an optical power meter, 850/1300 nm multimode source, FindFiber Remote ID source, magnetic straps, adapters, and a carrying case.

Fluke Networks TRC-MPO-UU-B MPO to MPO fiber optic test cord delivers reliable Type B polarity connectivity for MultiFiber Pro optical power meters and fiber test kits.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Fluke Networks MDC-MDC-SM UPC is a single-mode test reference cord designed for precise optical loss measurements, using reference-grade fiber and UPC connectors for consistent, repeatable Tier 1 testing.