Search results for: 'provides'

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

Fluke 2052 wire tracer kit delivers CAT IV 600 V safe troubleshooting for energized and de-energized circuits with four tracing modes, power flexibility, and precise fault locating.

The Fluke Networks FI2-7300 DC KIT bundles the FI-3000 FiberInspector Ultra camera with a Versiv mainframe, MPO and single-fiber adapters, cleaning tools, visible fault locator, fiber detector, and accessory kit — enabling complete fiber end-face inspection and detection in data-center environments.

Fluke MFTK-MM850-SM1310 – Complete MultiFiber Pro OLTS kit with MF-100 power meter and dual light sources (850 nm multimode, 1310 nm singlemode) for Tier-1 MPO loss, polarity, and continuity testing in data-center and telecom networks.

Fluke LinkIQ LIQ-DUO-KIT-1475 Cable+Network and Fiber Test Kit with IntelliTone Pro 200 – Combines 10G copper testing, fiber inspection, and cable tracing for a complete copper/fiber verification solution.

Fluke DSX2-5000 CableAnalyzer – Certifies Cat 5e, 6, 6A, and Class EA copper cabling up to 1 GHz with Level V accuracy. Built on the Versiv™ platform for fast, standards-compliant network certification and LinkWare™ Live reporting.

GigaSPEED XL® Cat 6 Patch Cord: Reliable, high-speed connectivity with LSZH safety for industrial & commercial networks. Flexible, durable, and designed for optimal performance.

Fujikura FID-30R Fiber Identifier: High-sensitivity, 8-hour battery, 2.4" touch screen, easy clamping, optical power meter. Perfect for fiber testing!

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

Fluke Networks FMC-1G enables 1 Gb/s fiber port testing with LinkIQ tools, providing SFPs, media converter, diagnostics, and a portable battery for field troubleshooting.

Fluke Networks FI-3000TP MMC ADP adapter tip enables MMC patch cord inspection with the FI-3000 FiberInspector, featuring a lead-free design and RoHS-compliant build.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

Fluke Networks FQM-M quickly locates bends, breaks, splices, and end-of-fiber distance on multimode links with fast 6-second testing and live fiber detection.

Fluke LinkIQ tester verifies 10G cable performance, checks switch connectivity, and identifies copper/fiber faults with Wi-Fi, PoE, and fiber inspection tools.

The Fluke LIQ-DUO-KIT delivers a platform capable of verifying cable performance up to 10 Gb/s, analyzing network switches and PoE power, and performing Wi-Fi band/channel diagnostics. Ideal for network infrastructure contractors needing a single kit for copper verification, switch diagnostics, PoE under load, and wireless troubleshooting.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.