Search results for: 'tools tools'

Fluke Networks DSX2-8000OI/GLD kit: Certify, inspect, and troubleshoot fiber/copper links with Wi-Fi and 1-year Premium Gold Care coverage.

The Fluke Networks DSX2-CFP-Q-ADD-R add-on kit includes dual DSX-5000 copper certification modules, quad OLTS fiber modules, and a Versiv 2 remote. It expands your Versiv certification system to handle both high-performance copper (Cat 6A/Class EA) and fiber loss/length testing in one streamlined workflow—ideal for full-scope network certification.

Fluke LinkIQ tester kit verifies cable, Wi-Fi, and fiber performance up to 10G with PoE, wiremap, and fault diagnostics for network pros.

Fluke DSX2-8000MI CableAnalyzer Kit – Certifies Cat 8/Class I & II copper with Level 2G accuracy and performs Tier-1 multimode fiber testing with CertiFiber Pro OLTS. Versiv platform ready for future expansion.

Fluke LinkIQ LIQ-DUO-KIT-1475 Cable+Network and Fiber Test Kit with IntelliTone Pro 200 – Combines 10G copper testing, fiber inspection, and cable tracing for a complete copper/fiber verification solution.

The Fluke LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit combines the LinkIQ Cable+Network Tester, IntelliTone Pro 200 probe, and Fluke 87V Industrial Multimeter in a single field-ready solution. It qualifies copper cabling up to 10GBASE-T using frequency-based measurements, performs switch and Ping diagnostics, and validates PoE negotiation and load delivery. The integrated multimeter supports electrical troubleshooting across industrial environments.

The Fluke MS-POE verifies Ethernet cabling and Power-over-Ethernet in one step. It identifies PoE class, voltage, and pairs while testing cable length, wiremap, and network speed—ideal for installing and troubleshooting PoE devices like IP cameras, phones, and access points.

Advanced EXFO MAX-730C SM OTDR with dual wavelength (1310/1550nm) precision, delivering high-performance fiber optic network diagnostics for telecom professionals and network engineers.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

Fluke Networks FiberLert-125 6P live fiber detector enables fast non-contact verification of active fiber signals, polarity, and connectivity across 850–1625 nm.

Fluke Networks FQM-M quickly locates bends, breaks, splices, and end-of-fiber distance on multimode links with fast 6-second testing and live fiber detection.

The Fluke Networks TS54-A-09-TDR integrates TDR, toner, pair-identifier and telecom test set in one rugged unit. Locates faults up to 3,000 ft, supports twisted pair/coax/parallel conductors and features field-ready protection for harsh environments.

Fluke Networks FI-3000TP MMC ADP adapter tip enables MMC patch cord inspection with the FI-3000 FiberInspector, featuring a lead-free design and RoHS-compliant build.

The Fluke LIQ-DUO-IE-KIT builds on the LinkIQ Duo platform with industrial Ethernet-ready adapters and delivers full cable bandwidth verification, network switch diagnostics, PoE testing and Wi-Fi analysis with added support for mission-critical industrial protocols and connectors.

Fluke Networks Cable Analyzer DSX2-8000QI-NW – Advanced copper and fiber certifier supporting Cat 8 to 2000 MHz with Level 2G accuracy. Includes Quad OLTS for Tier-1 multimode/singlemode fiber certification. Non-wireless version of the DSX2-8000QI.

Fluke Cable Analyzer DSX2-8000QI: Advanced copper and fiber certifier supporting Cat 8 up to 2000 MHz with Level 2G accuracy. Features Quad OLTS for Tier-1 fiber certification, fast diagnostics, and LinkWare™ Live integration.