Search results for: 'goods model'

Viavi Visual Fault Locator FFL-050: Compact, high-performance tool for fiber testing. 1mW output, 30+ hours battery, and 7km range. Ideal for field use.

EXFO FLS-600 Light Source: Versatile, reliable, and durable. Ideal for testing fiber optics with up to 50 hours of battery life. Accurate, portable, and easy to use.

Fujikura FID-30R Fiber Identifier: High-sensitivity, 8-hour battery, 2.4" touch screen, easy clamping, optical power meter. Perfect for fiber testing!

Achieve precise wireless alignment with the Sunsight Classic AAT. Fast, reliable azimuth, tilt, and roll measurements for optimal antenna performance. Built to last

Charger for Battery Operated Cable Cutter Input voltage: 110V, 4.0 Ah 40 min charge time

Fluke Networks DSX-5000 Cable Analyzer: Fast, reliable certification for Cat 6A and fiber cables. Modular design, accurate results, and built for tough job sites.

Viavi OMK-35 Test Kit: Dual-wavelength optical testing for fiber networks. Lightweight, portable, and efficient for seamless power level & loss measurements.

AFL Global 8-Channel CWDM Module: High-performance, reliable 1271-1611 nm range with low loss and high isolation. Ideal for CATV, Ethernet, and metro networks.

INNO Instrument FH-12F Fiber Series ribbon fiber holder for 12-fiber flat ribbon cable, supporting 200 µm and 250 µm coatings and compatible with View12R, View12R-200, and View12R PRO detachable setups.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks FMC-1G enables 1 Gb/s fiber port testing with LinkIQ tools, providing SFPs, media converter, diagnostics, and a portable battery for field troubleshooting.