Search results for: 'Autocat'

The Fujikura 70S is the fast and robust core alignment fusion splicer, with rubberized housing protection, providing stable and high–quality welding of optical fibers with low insertion losses. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

The Digiphone+ pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive faults that is unsurpassed in sensitivity.

The Sumitomo TYPE-72C+ with FC-6R+ is a high-definition, field-tough fusion splicer kit featuring ultra-fast 5s splicing, automatic cleaver, massive memory, dual ovens, and robust data/network compatibility for high-volume telecom and FTTx projects.

41S Fiber Fusion Splicer is welding machine for optical fiber by centering with active V-shaped grooves. The highest quality connections are obtained through the use of a fiber centering system (PAS).

SignalTEK NT utilizes a test method known in wide area networks as transmission testing to prove the performance of a network by sending real Ethernet data frames through the cabling and/or network devices. This provides a clear standards-based Pass/Fail of the link being tested. SignalTEK NT requires no configuration from the user as the two handsets automatically pair ready for testing; just select a usage scenario to simulate the appropriate service, from VoIP to CCTV, Video, and web traffic.

SignalTEK NT utilizes a test method known in wide area networks as transmission testing to prove the performance of a network by sending real Ethernet data frames through the cabling and/or network devices. This provides a clear standards-based Pass/Fail of the link being tested. SignalTEK NT requires no configuration from the user as the two handsets automatically pair ready for testing; just select a usage scenario to simulate the appropriate service, from VoIP to CCTV, Video, and web traffic.

INNO View 7 is a welding machine for single optical fibers of the core alignment class . The entire series of View devices is ultramodern in circuit design, performance, reliability and system performance.

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

The TS®30 Test Set top features include:

The Fluke Networks OneTouch AT G2 is a portable tester designed for network professionals to troubleshoot and analyze Ethernet and Wi-Fi network performance. It combines copper, fiber, and Wi-Fi troubleshooting capabilities in a single tool, allowing users to test wired Ethernet and Wi-Fi networks simultaneously. The tester offers standardized network troubleshooting and performance validation through the use of intuitive touch interfaces and a Setup Wizard for creating test profiles tailored to specific networks, services, and applications.

The digiPHONE+ 2 is a new, improved version of the digiPHONE+ that features better noise damping for more efficient fault location. The acoustic-magnetic cable fault location method is the most accurate, while the optional voltage gradient method and cable tracing method are also available. The device is automatically adjustable, so no user adjustment is necessary. Bluetooth headphones are also available as an optional accessory.

Product Overview

Detects IntelliTone digital signal for Locate, Isolate and CableMap Detects Analog SmartTonne Signal (500-1200Hz) and other analog toners.

VIAVI P5000i Digital Fiber Microscope: USB-powered, 200X/400X magnification, fast pass/fail analysis. Ensure perfect fiber connections every time!