Search results for: 'require'

The SLX-8MG is a managed industrial Ethernet switch designed for use in demanding industrial environments. It features eight Gigabit Ethernet ports, which can be configured for a variety of network topologies and applications. The switch is rugged and designed to withstand harsh operating conditions, including extreme temperatures, humidity, and vibration. It also supports advanced features such as VLANs, QoS, and IGMP snooping, making it ideal for use in industrial automation, transportation, and other mission-critical applications. The SLX-8MG is designed to be easy to install and configure, and it can be managed locally or remotely using a web-based interface or command line interface.

Fluke Networks QC-MPO-16/32-5P QuickClean cleaner removes contaminants from MPO 16/32 fiber connectors using a simple push-to-clean action.

Fluke Networks SRC9SCAPCLCAPC.3MM singlemode 0.3 m TRC protects OTDR ports with SC/APC to metal LC/APC connectors, delivering precise, reference-grade fiber testing.

EXFO FTB-1v2 OTDR kit with installed FTBx-730C-SM8-OPM-EA module for fiber link testing, including iOLM operation and built-in PM/VFL hardware.

The INNO Instrument VIEW 12R Pro is a 12-fiber ribbon fusion splicer with motorized clamp alignment, 5-inch touch LCD, integrated heat oven, and Nano-SIM IoT/GPS support. It stores up to 10,000 splice records for ribbon and single-fiber applications.

Fujikura FSM-50R12 ribbon fusion splicer delivers fast 12-fiber ribbon splicing with auto arc calibration, rapid sleeve heating, dual-view monitoring, and CT-30 plus HJS-02 tools for precise ribbon preparation.

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

Trend Networks LanTEK IV-500 R163000 Certified Pre-Owned Cable Certifier Kit with CAT6A VisiLINQ Adapters, Fiber Inspection Microscope Support, Tone Test and TeamViewer Remote Control Tools. Includes Main + Remote Units and Carry Case.

The Fluke Networks DSX-CHA003 DSX Series Coaxial Adapter is designed for use with the DSX-5000 CableAnalyzer to characterize installed coaxial cabling. It supports testing of 50 ohm, 75 ohm, and 93 ohm coaxial cable and enables insertion loss measurements over a frequency range of 5 to 1002 MHz in accordance with applicable test limits.

Allen-Bradley PN-94201 is an industrial fiber optic cable designed for reliable optical signal transmission in automation environments where electrical noise immunity and stable communication are required.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

Fluke Networks FINDFIBER FindFiber Remote ID Source enables fast optical fiber identification when used with a SimpliFiber Pro power meter, allowing single-technician verification of fiber routing and polarity.

Fluke Networks FI1000-MPO-RT replacement tip for FI-1000 FiberInspector provides precise MPO/MTP fiber inspection without a translator knob for seamless testing.

Fluke SM 9UM launch cord ensures accurate OTDR testing with single-mode SC/APC connectors, delivering reliable fiber optic network measurements.

Fluke MFTK1200 MultiFiber Pro MPO Fiber Test Kit – Optical power meter and source for fast MPO validation. Tests polarity, continuity, and loss of 12-fiber MPO trunks in seconds. Ideal for data centers requiring Tier-1 MPO certification and documentation.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.