Search results for: 'it's for'

The Fluke Networks FI2-7000-MPO is an MPO-optimized FiberInspector Ultra camera that provides automated analysis of MPO-12/MPO-24 end-faces, fast pass/fail results and high-resolution imaging for data-center and enterprise fiber-inspection workflows.

Fluke Networks CertiFiber Pro OLTS: Fast, accurate fiber certification with Wi-Fi connectivity, LCD display, and dual-band optical testing for professionals.

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

Banner Engineering IAT210S glass fiber optic sensor cable with diffuse-reflective sensing. Features a right-angle brass sensing end, stainless steel monocoil sheathing, 3.2 mm glass fiber core, and 4.572 m length. Designed for use with a separate fiber optic amplifier.

Fluke Networks OFP2-200-SI1490 HDR OTDR delivers fast singlemode fiber testing with SmartLoop™, WiFi connectivity, splitter detection, and inspection probe.

Fluke CertiFiber Pro MM Add-On Kit: Efficient fiber testing with OLTS accuracy, EF compliance, and fast dual-ended inspection.

Fluke Networks OptiFiber Pro OTDR delivers fast, precise fiber testing with SmartLoop, EventMap, and versatile singlemode support for enterprise and datacenter use.

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

Fluke Networks LinkIQ Industrial Ethernet Test Kit: Validate cabling up to 10GBASE-T, diagnose switches, test PoE Class 1–8, and generate reports with ease.

Fluke Networks OFP-200-S1625-MOD HDR module enables high-dynamic-range singlemode testing at 1310, 1550, and 1625 nm for OptiFiber Pro systems.

Fluke Networks FTK1475 SimpliFiber Pro Kit – Fiber testing kit with optical power meter, 850/1300 nm multimode and 1310/1550 nm singlemode sources, and FiberInspector Mini probe for connector inspection and loss verification.

Fluke Networks PRO3000F60-KIT: Filtered probe and tone generator for precise cable tracing, SmartTone™ tech, and interference blocking.

3Z RF Vision Antenna Alignment Tool: Accurate, weather-resistant alignment with built-in camera & AR. Perfect for precise antenna measurements and efficient setup.

Fluke LinkIQ LIQ-100-IE Industrial Ethernet Tester – Verifies copper cabling up to 10G and provides switch diagnostics. Includes M12-D and M12-X adapters for rugged industrial Ethernet connectors. Ideal for manufacturing, automation, and plant environments.

Fluke CertiFiber Pro CFP-Q-ADD Quad OLTS Add-On Kit – Expand your CertiFiber Pro setup with dual Quad OLTS modules, multimode & single-mode TRC kits, adapters, and hard carry case. Enables Tier-1 fiber loss, length & polarity testing with full reference cords included.

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Fluke FQM-SFP-M locator kit speeds multimode fiber testing with fast distance, fault, and splice detection plus live signal awareness for quick troubleshooting.

The Fluke Networks FI-1000-KIT delivers high-resolution fiber end-face inspection with USB connectivity, universal tips, and Versiv compatibility.

The FI-3000-NW FiberInspector Pro is a high-efficiency MPO and single-fiber inspection camera with Live View of full trunk to individual end-faces, autofocus/auto-centering, automated PASS/FAIL in seconds (<2 s per fiber), USB interface with the Versiv system, and WiFi disabled for secure facilities.