Search results for: 'optical network'

Sumitomo TYPE-71C+ Fiber Splicer: Fast, precise splicing with 4.1” LCD touchscreen, dual heaters, and 300 splices per battery charge. Reliable for all fiber types.

41S Fiber Fusion Splicer is welding machine for optical fiber by centering with active V-shaped grooves. The highest quality connections are obtained through the use of a fiber centering system (PAS).

Accelerate fiber deployments with the Hexatronic Stingray FOTA-ABF-LTT1792040/7, delivering fast, controlled air blown installation for microduct networks with portable, battery-powered precision in the field.

Sumitomo TYPE-72C+ Fusion Splicer: High-precision splicing for all fiber types. Fast, reliable, and compact for seamless fiber optic installations. Made in Japan.

Product Overview

Key Features 

The TYPE-72C improves splicing performance and reliability and has a newly designed user interface. The TYPE-72C includes a smartphone-like high-resolution touch screen for user friendliness. In Quick Mode, the TYPE-72C reduces splicing and heat shrink time to 5 seconds and 9 seconds respectively.

The Fujikura 70S is the fast and robust core alignment fusion splicer, with rubberized housing protection, providing stable and high–quality welding of optical fibers with low insertion losses. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

An OTDR launch cable, which connects the OTDR to the link-under-test, discloses the insertion loss and reflectance of the near-end connection. It is often available on a small spool or within a “launch box”, which is used to create the proper conditions for testing another similar optical fiber for faults. This method avoids undesirable variations in loss and distance measurements. A launch fiber will help to overcome the blind spot or Dead Zone of an OTDR brought about by high launch power or faults near the launch end of the fiber.

Product Overview