Search results for: 'Gattouz'

GigaSPEED XL® Cat 6 Patch Cord: Reliable, high-speed connectivity with LSZH safety for industrial & commercial networks. Flexible, durable, and designed for optimal performance.

Fujikura FID-30R Fiber Identifier: High-sensitivity, 8-hour battery, 2.4" touch screen, easy clamping, optical power meter. Perfect for fiber testing!

Achieve precise wireless alignment with the Sunsight Classic AAT. Fast, reliable azimuth, tilt, and roll measurements for optimal antenna performance. Built to last

Charger for Battery Operated Cable Cutter Input voltage: 110V, 4.0 Ah 40 min charge time

Replacement battery for 902-626 18V, 4 Ah Li-Ion

Silicone gel filled protection from elements UY AWG 22-26 Quantity 1000 pcs

Fluke Networks DSX-5000 Cable Analyzer: Fast, reliable certification for Cat 6A and fiber cables. Modular design, accurate results, and built for tough job sites.

Viavi OMK-35 Test Kit: Dual-wavelength optical testing for fiber networks. Lightweight, portable, and efficient for seamless power level & loss measurements.

AFL Global 8-Channel CWDM Module: High-performance, reliable 1271-1611 nm range with low loss and high isolation. Ideal for CATV, Ethernet, and metro networks.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

The INNO Instrument View Mini 2 OTDR (MINI2-SMF2) is a handheld optical time domain reflectometer designed for fiber optic maintenance and live network testing. This configuration includes a 1625nm filtered live port with a 30dB dynamic range for in-service fiber analysis without service interruption.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.

Fluke Networks FiberLert-125 6P live fiber detector enables fast non-contact verification of active fiber signals, polarity, and connectivity across 850–1625 nm.

Fluke DSX2-8000QOI Versiv 2 Cable Analyzer delivers ultra-fast Cat 8 copper certification and integrated fiber OTDR/OLTS testing for mixed media networks.

Cisco 2821 Integrated Services Router with WAAS NME-WAE-502-K9 for WAN optimization, onboard Gigabit Ethernet, and WIC-1DSU-T1-V2 T1 CSU/DSU connectivity. Modular design for branch networking versatility.

Fluke Networks FI-3000TP MMC ADP adapter tip enables MMC patch cord inspection with the FI-3000 FiberInspector, featuring a lead-free design and RoHS-compliant build.

The Fluke LIQ-DUO-IE-KIT builds on the LinkIQ Duo platform with industrial Ethernet-ready adapters and delivers full cable bandwidth verification, network switch diagnostics, PoE testing and Wi-Fi analysis with added support for mission-critical industrial protocols and connectors.