Search results for: '2.0 2 20 8'

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

Streamline fiber splicing with the UCL Swift KF4A-HDC—5-in-1 functionality for stripping, cleaning, cleaving, splicing, and protecting. Enjoy FSOC compatibility, scratch-free thermal stripping, and easy operation even in tight spaces. Choose your kit and get started—contact us today!

Fluke Networks MicroScanner2: Industrial Ethernet verifier with fast continuity, wiremap, and fault location to reduce downtime and ensure cable reliability.

EXFO FLS-600 Light Source: Versatile, reliable, and durable. Ideal for testing fiber optics with up to 50 hours of battery life. Accurate, portable, and easy to use.

Certified pre-owned VIAVI OLP-82P SmartClass Fiber Pro Kit for telecom and data center testing. Combines inspection and optical power measurement across key wavelengths with the P5000i microscope and FFL-050 VFL. Rugged, portable, and function-tested.

The INNO Instrument  Universal Fiber Holder is an accessory designed for INNO fusion splicers to position and secure optical fibers during splicing. The holder supports multiple fiber preparation types and provides stable alignment inside the splicer. Variant options support different splicer models and left or right holder configurations.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

Sumitomo T-72C+ Fusion Splicer: High-definition core alignment with fast splice times, 320 cycles, and durable design for efficient fiber optic splicing.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

AFL 8-Channel CWDM LGX Module: Optimize your optical network with low insertion loss, high isolation, and reliable performance for CATV, Ethernet, and metro networks.

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

The INNO Instrument FH Series Universal Fiber Holder is an accessory designed for INNO fusion splicers to position and secure optical fibers during splicing. The holder supports multiple fiber preparation types and provides stable alignment inside the splicer. Variant options support different splicer models and left or right holder configurations.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

AFL Global 8-Channel CWDM Module: High-performance, reliable 1271-1611 nm range with low loss and high isolation. Ideal for CATV, Ethernet, and metro networks.

Upgrade your fiber optic projects with this used INNO M9+ fusion splicer kit, featuring a standard V1 fiber cleaver and a low splice count for dependable performance. Don’t miss out—order from Cartoli now for quality and value!

Fujikura FID-30R Fiber Identifier: High-sensitivity, 8-hour battery, 2.4" touch screen, easy clamping, optical power meter. Perfect for fiber testing!

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

Quickly test and verify your network cables with the Fluke Networks MicroScanner™! Detect PoE, check wiremaps, and locate faults easily—perfect for pros on the go.

Quickly locate cables and faults with the Amprobe AF-600. This item features an A-frame design, compass guidance, and automatic gain signal control.