Search results for: 'check in'

The Viavi OMK-36V2 SmartPocket V2 Enterprise Plus Quad Single-Mode & Multi-Mode Test Kit is designed for installing and maintaining singlemode (SM) and multimode (MM) fiber optic networks. The test kit is equipped with the OLP-35V2 optical power meter and the OLS-36V2 quad-wavelength optical light source, which are both dedicated to power level, insertion loss measurements, and continuity checks.

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

Viavi OneExpert ONX-580: Advanced DSL & Fiber tester with WiFi, Bluetooth, and 4+ hours battery. Streamline testing with intuitive touch interface and cloud data management.

MultiWave Sensors Smart Aligner is a compact 3D antenna alignment tool with universal clamp, 0.5° azimuth accuracy, smartphone-enabled reporting, and rugged NEMA 4X/IP63 protection. Certified pre-owned and function-tested. Chat live or call 1-833-322-7865.

VIEW5 PRO’s 5-inch high-resolution color LCD touch screen with user-friendly intuitive GUI (Graphic User Interface) offers large and clear fiber images to users. By double-tapping the screen, users can Zoom In & Out the image to the world’s highest magnification of 520x. The fusion splicer is equipped with bua ilt-in IoT module that connects to the INNO’s View Pro Cloud Management System for real-time operation and management online. This innovative cloud-based solution is designed to create the most advanced and yet most uncomplicated splicing and work experiences ever.

Product Description

Product Overview

Product Overview

The CFP2-100-Q CertiFiber Pro Quad Optical Loss Test Set (OLTS) helps cabling professionals accomplish more than ever and comes with a Wi-Fi adapter for wireless connectivity to Fluke Networks LinkWare Live software. It's all about accurate, error-free certification, making jobs easier to manage and certifying fiber optic cabling to industry standards, faster.

The Fujikura 90S+ is a fusion splicer designed for high-speed, low-loss fiber optic splicing. It is an advanced tool that allows for quick, accurate and reliable splicing of single mode and multimode fibers.

The Digiphone+ pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive faults that is unsurpassed in sensitivity.

Certified pre-owned SMLP5-5 optical loss test set combining the OLS4 quad light source (850/1300/1310/1550 nm) and OPM5-2D power meter with Wave ID, Set Reference, on-board storage (>500 fibers) and USB/TRM reporting—ready for SM/MM certification work.

SMLP5-5 is a rugged loss test kit with data storage designed to measure insertion loss on singlemode & multimode fiber networks. Each SMLP5-5 Kit includes an OLS4 quad Optical Light Source and OPM5 Optical Power Meter.

The compact modular measuring platform EXFO FTB-1 Pro is an all-in-one solution for exhaustive testing of all types of data transmission networks with speeds up to 111.81 Gbit/s. One measuring module (single or double thickness) can be installed on the platform. The type of module determines the measuring capabilities of the platform.

OPM 5 is designed for measuring optical power in all network types and performing insertion loss measurements on multimode or single-mode fiber optic links. Automatic Wavelength Identification Significantly Increases EfficiencyThe standard Wave ID feature automatically detects and sets the receive wavelength(s), preventing setup and measurement errors (when used with OLS series light sources). It significantly increases efficiency and reduces technician errors—and saves testing time—by eliminating the need to test each wavelength individually.

Shop the INNO VIEW6S core alignment fusion splicer with V11 automatic fiber cleaver. Fast splicing, rugged design, SOC-ready, certified Cartoli package.

The Sumitomo TYPE-72C+ fusion splicer is the latest advancement in fusion splicing technology. With improved performance, reliability, and cutting-edge features, this splicer takes splicing to a whole new level. Building upon the industry-leading features of its predecessor, the TYPE-72C, this compact and lightweight powerhouse offers quick splicing, exceptional durability, and now introduces NanoTune™ technology, revolutionizing the splicing experience with AI algorithms for enhanced efficiency and accuracy. No more costly reworks due to insufficient fiber preparation; the TYPE-72C+ ensures seamless splicing and reduces overall costs. Stay ahead with its Preventive Maintenance feature, which alerts you to upcoming repairs or consumable replacements, minimizing unexpected downtime. With a lightning-fast 5-second splice in Quick Mode and an improved heating time of just 8 seconds, the TYPE-72C+ guarantees swift and efficient performance.