Search results for: 'support'

Transform your network testing with the Viavi NSC-200 Network & Service Companion, paired with the P5000i Digital Analysis Microscope. This all-in-one powerhouse delivers comprehensive fiber, Ethernet, and WiFi testing for streamlined troubleshooting and maintenance. Discover More or Get a Quote Today

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

Viavi OLS-36 Optical Light Source: Compact, quad-wavelength solution for accurate power and loss testing. 80h battery life for reliable field performance.

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

The SLX-8MG is a managed industrial Ethernet switch designed for use in demanding industrial environments. It features eight Gigabit Ethernet ports, which can be configured for a variety of network topologies and applications. The switch is rugged and designed to withstand harsh operating conditions, including extreme temperatures, humidity, and vibration. It also supports advanced features such as VLANs, QoS, and IGMP snooping, making it ideal for use in industrial automation, transportation, and other mission-critical applications. The SLX-8MG is designed to be easy to install and configure, and it can be managed locally or remotely using a web-based interface or command line interface.

Fluke DTX-1800 CableAnalyzer™: Ultra-fast 12-sec Cat 6 tests, 900MHz capability, fiber/copper support, 12-hour battery. Boost efficiency & accuracy!

Achieve perfect antenna alignment every time with the VIAVI 3Z Telecom RF Aligner RFA1000-fast, precise, and GPS-powered! Ready to boost your network? Get yours today!

Laser output is class 3A (around 3~5 milliwatt) Maximum opereration distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Three operation modes available: "CW" (Continuous wave output), "Pulse" and "Off" modes Continuous wave output mode (CW) for steady fault illumination Pulse mode helps to locate faults under high ambient light conditions Support LC 1.25mm connectors The button switch permits easy one handed operation Handy, pocket pen design 2 AAA-size alkaline batteries provide 50 hours of continuous operation

Viavi T-BERD 2000 DWDM: Advanced fiber testing solution with built-in power meter, VFL, and 9-hour battery. Boost productivity with smart, fast, and reliable field testing.

Fluke Networks OFP-QUAD OptiFiber Pro OTDR: Maximize fiber testing efficiency with multi-wavelength support, fast results, and expert-grade precision for flawless network performance.

Fluke Networks ADAP-PTNX-KIT: Complete Ethernet accessory kit with adapters and Dial Tone Detective for voice, data, and video cable testing.

Laser output is class 3A (around 3~5 mW) Maximum operation distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Continuous wave output mode for steady fault illumination Pulse mode locates faults under high ambient light Support 2.5mm connectors (for PC/FC/SC/ST) The button switch permits easy one handed operation Handy, pocket pen design 50 hours of continuous operation Requires 2 AAA batteries (not provided)

Fluke Networks installation kit with MS2-100 Cable Verifier ensures accurate cable testing and installation for network professionals.

The INNO Instrument Ribbon Holder are fiber ribbon holders designed for use with INNO Instrument View12R and View12R PRO fusion splicers. The holder supports 250 µm ribbon fiber during the splicing process, maintaining fiber alignment and stability within the splicer. Its detachable design allows quick installation and removal when preparing ribbon fibers for fusion splicing.