Search results for: '2.0 2'

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

INNO Instrument V30 Optical Multi Meter combines optical power measurement, visual fault location, and cable continuity testing in a handheld fiber optic test instrument designed for telecommunications installation and maintenance environments.

VIAVI OneExpert ONX-630 CATV field analyzer with DOCSIS 3.1 support: Configuration includes Sweepless Sweep with SWX and TSX packages, enabling forward and reverse sweep testing, OFDM analysis, and bonded channel measurement for cable networks.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

AFL Noyes SMLP4-4 Loss Test Kit: Precision fiber testing for SM/MM networks. Reliable, versatile, and efficient with 300hr usage. Perfect for pros!

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

Upgrade your fiber optic projects with this used INNO M9+ fusion splicer kit, featuring a standard V1 fiber cleaver and a low splice count for dependable performance. Don’t miss out—order from Cartoli now for quality and value!

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

Single Fluke DTX-MFM2 multimode fiber module for 850/1300 nm dual-fiber loss and length testing. Supports SC output, interchangeable adapters, VFL, and FindFiber functions.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument UN1COMT is a portable fiber splicing work tray with tripod designed for FTTH field operations. It provides a stable, elevated platform for securing fusion splicers and tools during ground-based or aerial work. The tray features integrated tool compartments and magnetic fixing points for organized equipment handling.

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.