Search results for: 'it's an'

The DSX-CHA003 coaxial adapters are used in conjunction with the DSX CableAnalyzer to certify coaxial cabling for network and video applications. It supports testing of 50 ohm, 75 ohm, and 93-ohm coaxial cable and its Length-Scaled test limits which automatically adjusts the Insertion Lost limit across the specified frequency range. 

OPM 5 is designed for measuring optical power in all network types and performing insertion loss measurements on multimode or single-mode fiber optic links. Automatic Wavelength Identification Significantly Increases EfficiencyThe standard Wave ID feature automatically detects and sets the receive wavelength(s), preventing setup and measurement errors (when used with OLS series light sources). It significantly increases efficiency and reduces technician errors—and saves testing time—by eliminating the need to test each wavelength individually.

OptiTap Simplex Plug AdapterFMAE Series adapters are used for patch cord inspection. They attach to the Patch Cord Microscope on theSmartClass Fiber Series, as well as the Fva Benchtop Microscope. They can also be connected to any VIAVI probe microscope by using the BFP-UFMAE, together with an FBP-BAP1 adapter. FMAE Series adapters are all female threaded.

The compact modular measuring platform EXFO FTB-1 Pro is an all-in-one solution for exhaustive testing of all types of data transmission networks with speeds up to 111.81 Gbit/s. One measuring module (single or double thickness) can be installed on the platform. The type of module determines the measuring capabilities of the platform.

Cast patch cord RJ45-RJ45 CAT category 6. It is made of a red U/UTP cable in a LSZH shell. Designed for switching network equipment.

SMLP5-5 is a rugged loss test kit with data storage designed to measure insertion loss on singlemode & multimode fiber networks. Each SMLP5-5 Kit includes an OLS4 quad Optical Light Source and OPM5 Optical Power Meter.

Fluke Networks MMC-62-SCSC Launch Cable is a multimode SC/SC fiber optic cable, is used for high-speed networks installation, inspection and troubleshooting. An OTDR requires launch cables or fiber rings to measure the end-to-end loss of fiber optic links. The multimode fiber has a 62.5/125µm core/cladding diameter.Length is 105 meters.

Fluke Networks MMC-62-SCSC Launch Cable is a multimode SC/SC fiber optic cable, is used for high-speed networks installation, inspection and troubleshooting. An OTDR requires launch cables or fiber rings to measure the end-to-end loss of fiber optic links. The multimode fiber has a 62.5/125µm core/cladding diameter.Length is 105 meters.

Singlemode and Multimode testing Built-in universal 2.5 mm tip sleeve PON, Telecom, CATV, and LAN/WAN applications Dual wavelength laser source and power meter options High accuracy and wide dynamic range Save OPM measurements (>100 single results) Transfer stored results to a PC or upload results to Fiberizer Cloud via micro USB interface for report generation and printing Reference power level setup and recall Splash-resistant keypad and chassis design High-contrast display - Visible outdoors and backlight for indoor or low-light conditions Alkaline or Rechargeable battery option with Auto power off Field-interchangeable optical adapters support multiple connector types and allow easy access for cleaning

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

The Digiphone+ pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive faults that is unsurpassed in sensitivity.

The new digiPHONE+2. A combination of different methods for efficient noise damping enables perfect acoustics that lets you hear only the fault noise.