Search results for: 'required'

The Fluke network adapter set delivers reliable CAT 6A/Class EA testing with a durable design for technicians and network professionals.

The Fluke Networks DSX-CHA003 DSX Series Coaxial Adapter is designed for use with the DSX-5000 CableAnalyzer to characterize installed coaxial cabling. It supports testing of 50 ohm, 75 ohm, and 93 ohm coaxial cable and enables insertion loss measurements over a frequency range of 5 to 1002 MHz in accordance with applicable test limits.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

Fluke Networks MMC-50-SCST multimode launch cable with 50 µm fiber and SC/ST connectors. Designed for fiber optic testing applications, this 140-meter launch cable supports network test setups requiring multimode fiber connections.

Fluke SM 9UM launch cord ensures accurate OTDR testing with single-mode SC/APC connectors, delivering reliable fiber optic network measurements.

Fluke MFTK1200 MultiFiber Pro MPO Fiber Test Kit – Optical power meter and source for fast MPO validation. Tests polarity, continuity, and loss of 12-fiber MPO trunks in seconds. Ideal for data centers requiring Tier-1 MPO certification and documentation.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

Fluke Networks fiber optic cable: dependable singlemode SC/SC 2m cord ensuring stable, high-speed network connectivity for precise testing.

Fluke Networks fiber optic launch cable delivers reliable 62.5 µm multimode performance with 105m length, SC to LC connectors, ideal for network testing.

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

Fluke CFP2-Q-ADD-R CertiFiber Pro Quad OLTS kit enables fast fiber loss testing, dual-wavelength measurement, and automated Pass/Fail analysis for accurate certification.

Fluke CFP2-100-Q/GLD CertiFiber Pro OLTS delivers fast fiber certification with 3-second tests, dual-wavelength measurement,

The Fluke DSX2-8000/GLD Cable Analyzer delivers industry-leading performance for certifying twisted pair cabling up to 40 Gigabit Ethernet. Designed for network installers, technicians, and project managers, it ensures reliable compliance with Cat 5e, Cat 6, Cat 6a, Cat 8, Class FA, and Class I/II standards—boosting productivity and eliminating costly rework.

Fluke Networks FQM-M quickly locates bends, breaks, splices, and end-of-fiber distance on multimode links with fast 6-second testing and live fiber detection.

Cisco 2821 Integrated Services Router with WAAS NME-WAE-502-K9 for WAN optimization, onboard Gigabit Ethernet, and WIC-1DSU-T1-V2 T1 CSU/DSU connectivity. Modular design for branch networking versatility.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

T-BERD/MTS-6000A is a compact and lightweight test platform designed for all phases of the network lifecycle from installation to maintenance of fiber networks. Modular in design, the T-BERD/MTS-6000A offers an extensive portfolio of test functionality for multiple network layers.

The SLX-8MG is a managed industrial Ethernet switch designed for use in demanding industrial environments. It features eight Gigabit Ethernet ports, which can be configured for a variety of network topologies and applications. The switch is rugged and designed to withstand harsh operating conditions, including extreme temperatures, humidity, and vibration. It also supports advanced features such as VLANs, QoS, and IGMP snooping, making it ideal for use in industrial automation, transportation, and other mission-critical applications. The SLX-8MG is designed to be easy to install and configure, and it can be managed locally or remotely using a web-based interface or command line interface.