Search results for: 'wholer'

The Fluke Networks DSX2-8000 CableAnalyzer is a copper certification tester for Cat 5e, 6, 6A, and 8 cabling. It certifies up to 2 GHz (TIA Level 2G / IEC Level VI) and supports 25G/40G copper Ethernet with fast test times and LinkWare™ reporting.

Fluke Networks OTDR OptiFiber Pro OFP2-100-QI – Advanced fiber optic tester for fast certification and troubleshooting in enterprise and data center networks.

Fluke IntelliTone Pro 200 Tone Generator and Probe: Accurately trace and locate twisted pair, coax, and cable runs with digital and analog signaling. Ideal for network technicians needing reliable cable tracing in active networks.

Pro Launch PS-L-150-LUCU-B Pouch: High-quality 50m LC/UPC to SC/UPC fiber optic cable for reliable performance in any environment. Durable, easy-to-use, and efficient.

Anritsu MT9083A2-073 SM Unit: High-performance fiber optic testing with 1310/1550 nm capabilities. Includes essential accessories for seamless, efficient operations.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

Fluke DSX2-8000MI CableAnalyzer Kit – Certifies Cat 8/Class I & II copper with Level 2G accuracy and performs Tier-1 multimode fiber testing with CertiFiber Pro OLTS. Versiv platform ready for future expansion.

Fluke Networks OTDR OptiFiber Pro OFP2-100-Q/GLD – Quad OTDR for Tier-2 fiber certification and troubleshooting. Tests multimode (850/1300 nm) and singlemode (1310/1550 nm) with SmartLoop™ bi-directional analysis, ultra-short dead zones, and LinkWare™ Live. Includes 1-year Gold Support.

The Fluke MS-POE verifies Ethernet cabling and Power-over-Ethernet in one step. It identifies PoE class, voltage, and pairs while testing cable length, wiremap, and network speed—ideal for installing and troubleshooting PoE devices like IP cameras, phones, and access points.

Charger for Battery Operated Cable Cutter Input voltage: 110V, 4.0 Ah 40 min charge time

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument View Mini 2 OTDR (MINI2-SMF2) is a handheld optical time domain reflectometer designed for fiber optic maintenance and live network testing. This configuration includes a 1625nm filtered live port with a 30dB dynamic range for in-service fiber analysis without service interruption.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.

Clark Wire SMPTE Fiber Camera Cable: 250' bend-insensitive, extra-flexible, high-performance cable for remote, ENG, and studio use. Built for durability and reliability.

INNO Instrument V30 Optical Multi Meter combines optical power measurement, visual fault location, and cable continuity testing in a handheld fiber optic test instrument designed for telecommunications installation and maintenance environments.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Multimode launch cable 50μm SC/SC — Fluke Networks MMC-50-SCSC Launch Cable is a multimode SC/SC fiber optic cable used for high-speed network installation, inspection, and troubleshooting. The multimode fiber has a 50/125µm core/cladding diameter. Its length is 105 meters.

This fiber optic viewing scope kit makes it simple to view ST/SC pre-encapsulated FDDI, and the ends of fiber before and after cleaving operations.

LAN and telecom, 4 pairs UTP (24 AWG) 110 type cable side and cross-connect side terminal blocks One end for seating and cutting off wires Other end for seating wires only

Works on BIX blocks Fits in most industry standard handles Twist and lock style blade

LAN and telecom, 5 pairs UTP (24 AWG) 110 type cable side and cross-connect side terminal blocks One end for seating and cutting off wires Other end for seating wires only

Quickly locates, traces, and verifies electrical, data, and telecom cables—live or de-energized. The 6683 features dual tracing modes, NCV detection up to 1000 Vac, and digital transmitter ID coding.