Search results for: 'chin chun keat'

An OTDR launch cable, which connects the OTDR to the link-under-test, discloses the insertion loss and reflectance of the near-end connection. It is often available on a small spool or within a “launch box”, which is used to create the proper conditions for testing another similar optical fiber for faults. This method avoids undesirable variations in loss and distance measurements. A launch fiber will help to overcome the blind spot or Dead Zone of an OTDR brought about by high launch power or faults near the launch end of the fiber.

Product Description

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The Fluke Networks DSX2-5000QOI is an advanced cable analyzer designed to support all copper and fiber network certification testing requirements. This device is specifically engineered to provide comprehensive and accurate test results for certification, troubleshooting, and network maintenance of structured cabling systems.

OPM 5 is designed for measuring optical power in all network types and performing insertion loss measurements on multimode or single-mode fiber optic links. Automatic Wavelength Identification Significantly Increases EfficiencyThe standard Wave ID feature automatically detects and sets the receive wavelength(s), preventing setup and measurement errors (when used with OLS series light sources). It significantly increases efficiency and reduces technician errors—and saves testing time—by eliminating the need to test each wavelength individually.

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DTX-MFM2 fiber module are used with a DTX Series Cable Analyzer to test and certify fiber optic cabling installations. 

Ensure fast and accurate fiber optic certification with the Fluke Networks CFP2-100-Q CertiFiber Pro Quad OLTS V2 with Wi-Fi. Designed for both multimode and singlemode networks, this advanced tester delivers reliable results with an intuitive interface and wireless connectivity. Upgrade your fiber testing—contact us today to learn more or request a demo!

The Fujikura 90S+ is a fusion splicer designed for high-speed, low-loss fiber optic splicing. It is an advanced tool that allows for quick, accurate and reliable splicing of single mode and multimode fibers.

Launch Box

Launch Box

Launch Box

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

The Sumitomo TYPE-72C+ fusion splicer is the latest advancement in fusion splicing technology. With improved performance, reliability, and cutting-edge features, this splicer takes splicing to a whole new level. Building upon the industry-leading features of its predecessor, the TYPE-72C, this compact and lightweight powerhouse offers quick splicing, exceptional durability, and now introduces NanoTune™ technology, revolutionizing the splicing experience with AI algorithms for enhanced efficiency and accuracy. No more costly reworks due to insufficient fiber preparation; the TYPE-72C+ ensures seamless splicing and reduces overall costs. Stay ahead with its Preventive Maintenance feature, which alerts you to upcoming repairs or consumable replacements, minimizing unexpected downtime. With a lightning-fast 5-second splice in Quick Mode and an improved heating time of just 8 seconds, the TYPE-72C+ guarantees swift and efficient performance.

The Sumitomo TYPE-72C+ with FC-6R+ is a high-definition, field-tough fusion splicer kit featuring ultra-fast 5s splicing, automatic cleaver, massive memory, dual ovens, and robust data/network compatibility for high-volume telecom and FTTx projects.